Manual Braun 5676 (page 14 of 66) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

514828

Zoom out

Zoom in

1/66

Trouble-Shooting

Problem Possible reason Remedy

SHAVER

Unpleasant smell

from the shaver head.

1. Shaver head is cleaned with

water.

2. Cleaning cartridge is in use

for more than 8 weeks.

1. When cleaning the shaver head with water only

use hot water and from time to time some liquid

soap (without abrasive substances). Remove Foil

& Cutter cassette to let it dry.

2. Change cleaning cartridge at least every

8 weeks.

Battery performance

dropped significantly.

1. Shaver head is regularly

cleaned with water but not

lubricated.

2. Foil and cutter are worn

which requires more power

for each shave.

1. If the shaver is regularly cleaned with water, apply

a drop of light machine oil on top of the foil once

a week for lubrication.

2. Renew Foil & Cutter cassette.

Shaving performance

dropped significantly.

1. Shaving system is clogged.

2. Foil and cutter are worn.

1. Soak the Foil & Cutter cassette into hot water

with a drop of dish liquid. Afterwards rinse it

properly and tap it out. Once dry apply a drop of

light machine oil on the foil.

2. Renew Foil & Cutter cassette.

Cooling element is

warm.

1. Shaver was used with

cooling function a couple of

minutes before.

2. Battery capacity is too low

for the cooling function.

1. You can use the shaver like this or turn on the

cooling function and wait a few seconds until it is

activated again.

2. Charge the shaver after each shave to ensure

sufficient battery capacity for the cooling

function.

Shaver head is

damp.

1. Drying time after automatic

cleaning was not sufficient.

2. Drain of the Clean&Charge

station is clogged.

1. Clean directly after shaving to allow enough time

for drying.

2. Clean the drain with a wooden toothpick.

CLEAN&CHARGE STATION

Cleaning does not

start when pressing

the start button.

1. Shaver is not placed properly

in the Clean&Charge station.

2. Cleaning cartridge contains

not enough cleaning fluid

(display lights red).

3. Appliance is in stand-by

mode.

1. Insert shaver into the Clean&Charge station

(contacts of the shaver need to align with

contacts in the station).

2. Insert new cleaning cartridge.

3. Press start button twice.

Increased

consumption of

cleaning fluid.

Drain of the Clean&Charge

station is clogged.

– Clean the drain with a wooden toothpick.

– Regularly wipe the tub clean.

96189703_CoolTec_MN_S6-68.indd 1496189703_CoolTec_MN_S6-68.indd 14 11.10.12 10:4211.10.12 10:42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun 5676 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun 5676 Manual

Product: