8273
4
Zoom out
Zoom in
Previous page
1/10
Next page
Description
1 Distancing comb 4 On/off switch
2 Pivoting twin cutter system with beard length selector
a beard trimmer 5 Memory switch
b contour trimmer (for 6 beard length settings)
c release buttons 6 Pilot light
3 Speed selector
Technical specifications
Power supply: 100 240 V
2
/ 50 or 60 Hz (automatic adaptation)
Wattage: 1.35
Charging your beard trimmer for cordless operation
For the first 3 chargings: Plug in trimmer with the on/off switch on position «0»
and charge it for at least 20 hours
. The pilot light indicates that the trimmer is
charging.
Once the trimmer is completely charged, use it without the cord until discharged.
Then recharge to full capacity again (subsequent charges will take about
16 hours).
A full charge will give up to 30 minutes of cordless trimming depending on
your beard. However, the maximum capacity will only be reached after several
charging/discharging cycles.
Best environmental temperature range for charging is 60 °F to 95°F / 15 °C to 35 °C.
Using your beard trimmer
Speed selector
1 Normal setting for beard and contour trimming
2 High speed setting for strong beard and difficult areas (e.g. chin)
Beard trimming (A)
Place the distancing comb on the beard trimmer while the on/off switch is on
position «0».
To start trimming, press the on/off switch and push it up to the desired beard
length. You may choose between 6 settings: approx. 1, 3, 6, 9, 12, 16 mm.
It is advisable to begin with the highest setting and then reduce the setting until
you reach the desired beard length.
Hold the distancing comb with the angled edge against your beard and guide
the trimmer against the direction of hair growth.
As you become familiar with beard length settings, you may want to adjust the
memory switch
to your preferred beard length setting by sliding it up. With the
preset memory switch, the motor will not start before the on/off switch has
reached the memory switch setting.
To avoid clogging the distancing comb with hair, clean it from time to time with
the brush. Please note that the distancing comb can only be taken off, when the
trimmer is turned off.
Contour trimming (B)
The contour trimmer is ideal for precisely outlining beard contours, for shaping
partial beards and also for removing long single hairs.
To use the contour trimmer, take off the distancing comb. Tip (tilt) the twin
cutter system so that the narrow contour cutter locks in the upper position.
Keeping your trimmer in top shape
Cleaning and care (C)
After each use, take off the distancing comb and slightly shake or brush hair
from the beard trimmer and the distancing comb.
Press the release buttons to lift off the twin cutter system. Using the brush,
clean the twin cutter system and the inside of the trimmer.
To keep the twin cutter system working properly, we recommend that you oil
the cutting system regularly with light machine oil.
Then click the twin cutter system back to original position by pushing forward.
Preserving the rechargeable battery
In order to maintain the capacity and life of the rechargeable battery, the trimmer
has to be discharged by regular use approximately every 6 months. Then
recharge to full capacity again. Do not keep the trimmer on permanent charge.
Environmental notice
This appliance is provided with a nickel-hydride rechargeable battery
which does not contain any harmful heavy metals. Nevertheless,
in the interest of recycling raw materials, please do not dispose of
the appliance in the household waste at the end of its useful life.
Disposal can take place at a Braun Service Center or at appropriate
collection sites.
Subject to change without notice.
5601113_EP60_NA Seite 4 Donnerstag, 29. Januar 2004 2:16 14
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun 5601 EP60 Exact Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun 5601 EP60 Exact Power in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info