428811
11
Zoom out
Zoom in
Previous page
1/62
Next page
12
B Before starting off
Preparing your skin
Your skin must be dry and free from
grease or cream.
Optional skin cooling: For the first few
epilations or if you have sensitive skin you
can use the cooling application, recom-
mended by dermatologists to help reduce
possible skin irritation.
Ensure that the gel pack has been in
the deep freezer (***) for at least 2 hours
(for convenience you can store the gel
pack in the freezer).
Insert the
gel pack underneath the
glove’s transparent foil. Use only with
glove.
Put transparent (cool) side of the glove
on your leg.
Start cooling for approx. 1/2 minute,
longer if needed.
Epilate the cooled skin area immedi-
ately as described in section «C».
Repeat cooling and epilating until
completion.
While epilating, please ensure your skin
is dry.
Im
portant: Apply cooling glove to the
same area for no longer than 2 minutes.
Keep away from sunlight. Do not use
gel pack when damaged. Dispose of in
household waste. Do not use if you are
hypersensitive, allergic to the cold, or
if your skin suffers from sensory disturb-
ances, when suffering from cardiac dis-
eases or arterial circulatory disorders.
Preparing the appliance
Before starting off, thoroughly clean
the epilation head you want to use
(
B or b).
To remove the epilation head, press the
release buttons
3 on the left and right
and pull it off.
Click the desired head into place:
Choose the starter epilation head
b
if you are epilating for the first time or
if you have very sensitive skin.
Once your skin is used to epilation,
you may switch to the standard
epilation head
B which allows a
more efficient and faster epilation
thanks to its greater number of
tweezers.
Plug the cord connector
6 into the
socket
5 and plug the transformer
plug
7 into an electrical outlet.
C How to epilate
1 Make sure one of the clips A or a is
attached to the epilation head.
To turn on the appliance, slide switch
4 to the «optimal» setting. For reduced
speed, choose the «soft» setting. The
SmartLight illuminates as long as the
appliance is switched on.
2 Rub your skin to lift short hairs.
For optimum performance hold the
appliance at a right angle (90°) against
your skin. Guide it in a slow, continuous
movement without
pressure against
the hair growth, in the direction of the
switch.
As hair can grow in different directions,
it may also be helpful to guide the
appliance in different directions to
achieve optimum results.
Both rollers of the massaging rollers
clip
A should always be kept in contact
with the skin, allowing the pulsating
movements to stimulate and relax the
skin for a gentler epilation.
If you are used to epilation and look
for a faster way to efficiently remove
hair, attach the EfficiencyPro clip
a.
It allows maximum skin contact and
ensures an optimum usage position.
5396383_SE5180_P6-68 Seite 12 Mittwoch, 27. Juli 2005 2:41 14
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun 5270 silk epil x elle body system at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun 5270 silk epil x elle body system in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info