Manual Braun 395cc-3 - 5772 (page 11 of 62) (All languages)

695306

Zoom out

Zoom in

1/62

Precision setting switch («lock») (3)

For precise handling in hard to shave areas

(e.g. under the nose) slide the switch (3) to

the right to position «lock». The centre trim-

mer and one foil will be lowered.

Tips for the perfect shave

For best results, Braun recommends you

follow 3 simple steps:

1. Always shave before washing your face.

2. At all times, hold the shaver at right

angles (90°) to your skin.

3. Stretch your skin and shave against the

direction of your beard growth.

B Keeping your shaver in top

shape

Cleaning indicator

Your shaver should be cleaned daily in the

Clean&Renew™, and certainly when the

yellow cleaning light (7) shines constantly

after shaving. If this is not done, the yellow

light will go out after some time. The shaver’s

electronics will then assume it has been

cleaned manually and a new calculation of

the time when the next cleaning is required

will be started. During the cleaning process in

the Clean&Renew™ the yellow light will flash

and will go off after approx. 4 hours when

cleaning is finished.

Automatic cleaning

Once the shaver is put into the

Clean&Renew™, it is cleaned automatically

(see «C Clean&Renew™»).

Manual cleaning is recommended only when

the Clean&Renew™ is not available, e. g.

when travelling.

Manual cleaning

The shaver head is suitable for

cleaning under running tap water.

Warning: Detach the shaver from the

power supply before cleaning the

shaver head in water.

Regular cleaning ensures better shaving

performance. Rinsing the shaver head under

running water after each shave is an easy

and fast way to keep it clean:

Switch the shaver on (cordless) and rinse

the shaver head under hot running water.

You may use liquid soap without abrasive

substances. Rinse off all foam and let the

shaver run for a few more seconds.

Next, switch off the shaver, remove the

shaver Foil & Cutter cassette (1) and let it dry.

If you regularly clean the shaver under

water, then once a week apply a drop of

light machine oil onto the long hair trimmer

(2) and shaver Foil & Cutter cassette (1).

Alternatively, you may clean the shaver using

a brush:

Switch off the shaver. Remove the shaver

Foil & Cutter cassette and tap it out on a

flat surface.

Using a brush, clean the inner area of the

shaver head. However, do not clean the

shaver Foil & Cutter cassette with a brush

as this may damage it.

Replacement light for shaving parts/Reset

To maintain 100% shaving performance,

replace the shaver Foil & Cutter cassette (1),

when the replacement light for shaving parts

(8) comes on (after about 18 months) or when

worn.

The replacement light will remind you during

the next 7 shaves to replace the foil and

cutter cassette. Then the shaver will auto-

matically reset.

After you have replaced the Foil & Cutter

cassette (1), press the on/off switch (4) for at

least 5 seconds to reset the counter.

While doing so, the replacement light blinks

and goes off when the reset is complete. The

manual reset can be done at any time.

Preserving the batteries

In order to maintain the optimum capacity

of the rechargeable batteries, the shaver

•

99470524_395cc_S6-64.indd 1199470524_395cc_S6-64.indd 11 02.03.2010 8:22:34 Uhr02.03.2010 8:22:34 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Braun 395cc-3 - 5772 in the language / languages: All languages as an attachment in your email.

The manual is 2,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Braun 395cc-3 - 5772 Manual

Product: