474228
9
Zoom out
Zoom in
Previous page
1/31
Next page
9
Wall mount
If you prefer to mount the SmartGuide display
unit on a wall, mirror or other surface, use
the adhesive tape (k) to fix the wall mount.
Before doing so, make sure the chosen surface
is clean and dry (remove grease and dust first).
Position the wall mount so that the Oral-B logo
is readable. Then, press the wall mount evenly
and firmly to the wall. Wait 24 hours before
sliding the SmartGuide display unit into the fixed
wall mount.
Please note: The adhesive tape will not work on
dirt-repellent surfaces.
Cleaning recommendations
After brushing, rinse your brush head
thoroughly under running water.
Remove the brush head from the handle and
clean both parts separately under running
water. Then, wipe them dry before you put the
handle on the charging unit.
Before cleaning your charging unit, make sure
you disassemble it first. The charging ring and
SmartPlug should never be placed in the dish-
washer. However, all other parts (base plate
and protective cover) are dishwasher-safe.
From time to time, you can also clean the
charging ring, SmartPlug and SmartGuide
display unit with a damp cloth. Both the
SmartPlug charger and SmartGuide display
unit should never be placed in water.
Synchronizing
In order to avoid interference of display
messages when using more than one Oral-B
Professional Care SmartSeries 5000 toothbrush
with separate SmartGuide display units in the
same household, you need to assign the
handles to their respective display units. Please
follow the steps below:
Push the «h/min» button in the battery
compartment for at least 3 seconds. The
SmartGuide display unit shows «L---», in-
dicating the «Learn» mode for synchronization
is activated.
Now you are requested by a flashing
on/off button in the toothbrush icon on the
SmartGuide display unit to turn the handle on.
When doing so, the automatic synchronization
process starts. It is finished when «L-1-» is
displayed.
Then turn off the handle.
If you would like to assign a second handle to
the same SmartGuide display unit, repeat the
last two steps described above with the other
handle. You can exit the «Learn» mode by
pressing the «h/min» or «set» button. Otherwise
the «Learn» mode will automatically end after
30 seconds.
Please note:
A maximum of 2 handles can be synchronized
with one SmartGuide display unit. After you
synchronized the second handle, «Full» will be
displayed.
set
h/min
3 sec.
set
h/min
3 sec.
99565802_D32_NA.indd 999565802_D32_NA.indd 9 07.06.2010 9:11:05 Uhr07.06.2010 9:11:05 Uhr
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun 3731 Oral B PC SmartSeries 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun 3731 Oral B PC SmartSeries 5000 in the language / languages: English, French, Spanish, Spanish as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info