454370
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
4 Keeping your shaver in top shape
4.1 Cleaning
After shaving, switch the shaver off. Remove the foil frame
4
(d) and gently tap it
out on a flat surface.
Then thoroughly clean the cutter block with the brush. About every four weeks,
clean the cutter block with Braun cleaning agents.
Do not clean the shaving foil with the brush.
If you have a very dry skin and you notice a reduced operation time of the shaver,
you should put a drop of sewing machine oil onto the shaving frame.
Put on the foil protection cap to protect the foil and to prevent the shaver from
accidentally switching on, especially when travelling.
4.2 Changing the shaving parts
To maintain optimum shaving performance, we recommend to replace the shaving
frame and the cutter block every 1 1/2 year or when these parts are worn.
Take out or replace the foil frame only after having removed the shaving head
from
the shaver. To remove the foil frame, firmly press both release buttons sumultane-
ously until the foil frame comes away from the shaving head, and lift it off (e). Handle
the foil frame carefully to avoid damaging the foil. When replacing the foil frame,
carefully press it into the shaving head until it clicks into position.
To remove the cutter block, set it in crosswise position and lift it off (f).
To replace the cutter block, snap onto the holding studs.
4.3 Preserving the cell unit
In order to maintain the capacity of the cell unit, the shaver has to be discharged by
shaving every 6 months approximately. Then recharge the shaver to full capacity
again.
Do not expose the shaver to temperatures of more than 50 °C for longer periods of
time.
5 Environmental notice
This appliance is provided with a nickel-hydride cell unit.
This cell does not contain any harmful heavy metals. Nevertheless, please
do not dispose of this appliance in the household waste at the end of its
useful life. Disposal can take place at a Braun Service Centre or appropri-
ate collection sites. However, if you prefer to dispose of the cell unit
yourself, remove the cell unit as shown on page 40.
Subject to change without notice.
This product conforms to the EMC-Requirements as laid down by the
Council Directive 89/336/EEC and to the Low Voltage Regulation
(73/23 EEC).
5564190_3520_S.4-42.fm Seite 7 Montag, 29. April 2002 2:54 14
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun 3520 Micron at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun 3520 Micron in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info