695570
13
Zoom out
Zoom in
Previous page
1/84
Next page
13
The fine hairs which regrow might
not manage to get through to the
skin surface. In order to prevent
in-growing hairs, we recommend
the regular use of massage sponges
(e.g. after showering) or exfoliation
peelings. By a gentle scrubbing
action, the upper skin layer is
removed and fine hairs can get
through to the skin surface.
How to epilate
Your skin must be dry and free
from grease or cream.
Before starting, thoroughly clean
the epilator head .
Put on the epilator head and make
sure that the EverSoft attachment
is in place.
Plug the cord connector into
the socket and plug the trans-
former plug into an electrical
outlet.
1. To turn on the appliance, slide
switch up to setting «2»
(«2» = normal epilation,
«1» = gentle epilation).
2. Rub your skin to lift short hairs.
In order to make best use of the
EverSoft attachment, hold the
appliance at right angles (90°)
against your skin and guide it
against the hair growth and in
the direction of the switch. When
using the EverSoft attachment,
make sure that both wheels are
always kept in contact with the
skin. Do not press too hard.
3. Le
g epilation
Epilate your legs from bottom
upwards. When epilating behind
the knee, keep the leg stretched
out straight.
4. Underarm and bikini line e
pilation
User tests monitored by dermatol-
ogists have shown that you may
epilate under the arm and at the
bikini line as well. Be aware that
these areas are particularly
sensitive to pain. However, the
pain sensation will diminish with
repeated usage.
For this specific application, we
would like to give the following
advice: Before epilating,
thoroughly clean the respective
area to remove residue (like deo-
dorant). Then dry with a towel,
carefully using a dabbing action.
When epilating underarm, keep
your arm raised up and guide the
appliance in different directions.
Cleaning the epilator head
5. After epilating, unplug the
appliance and clean the epilator
head: First take off the EverSoft
attachment and brush out the
rolls.
6. Thoroughly clean the tweezer
element with the cleaning brush
and also with cleaning fluid
(e.g. alcohol). While cleaning,
you can turn the tweezer element
manually. To remove the epilator
head, press the release buttons
on the left and right and pull it off.
2
1
6
5
7
4
1
3
5316406_ES2390_P6-84 Seite 13 Mittwoch, 10. Januar 2001 3:47 15
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun 2390 - 5317 silk-epil eversoft at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun 2390 - 5317 silk-epil eversoft in the language / languages: All languages as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info