25
EN
— Press in the ”On/Off” button .
— Turn the selector to select a heavy or gentle drying programme to
suit your type of washing
— Select the “ ” (Easy ironing) option, or not. This option finishes your
programme with a 2 hour ”Resting” period (see ”Details of the options”)
— Set the desired time via button (only dry washing that has been spun at
least at 800 rpm)
— Select immediate start by pressing the ”Start/Pause” button ...
— ... Or select a ”Delayed start” via buttons and .
R3
2
R
1
I / O
Light
and options chosen
+
e.g.
Light
+
display of the remaining
cycle time on
or display of time remaining
before the cycle starts
A
A
•Programming a Drying Only cycle:
•Maintaining your machine’s performance:
— At the end of the cycle, you must clean the drying filter (see the Chapter ”MAINTAINING YOUR
MACHINE: Cleaning the drying filter”).
•Full programming (continued) :
— ... Or select a start delayed by 1 - 19 hours by using button to select this
option and then using button to set the period of the delay.
R
3
Light
+ display of time remaining
before the cycle starts
A
4 / PROGRAMMING YOUR MACHINE
Lights and/or display
—
Press the ”Start/Pause” button to interrupt the cycle.
—
Add or remove the items of laundry*.
—
Press the ”Start/Pause” button to restart the cycle.
(*) The lid may take 1-2 minutes to unlock
NB: If you have selected a ”Delayed Start”, you can instantaneously access
the drum at any time during the phase before the washing cycle starts,
without having to interrupt and restart the cycle.
2
2
Flashing light
+ counter stopped
Light permanently lit
+ counter restarts
A
B
A
B
•Adding or removing an item during the cycle (impossible during spin):
•End of the cycle:
— At the end of the cycle, the display shows ”- 0 -”.
Release the ”On/Off” button and wait 1-2 minutes for the safety
device to unlock the lid.
NB: To aid access to your washing, the opening to the drum is automatically
positioned at the top.
I / O
Cancelling during programming or washing or during a pause:
— Hold down the ”Start/Pause” button for at least 1 second.
This can be done at any time during the cycle or during programming, or
even during a pause.
NB: If you do this while the machine is waiting to start during a delayed
start, only the delayed start is cancelled.
2
Return to initial display
