552178
19
Zoom out
Zoom in
Previous page
1/80
Next page
19
EN1 / INTRODUCTION TO YOUR MACHINE
•REMOVING THE TRANSPORT
CLAMPS
Important:
The following operations must be
performed before you use the machine Fig. 1 & 2.
First of all remove the piece of expanded
polystyrene from under the lid.
Rear transport clamp
(Fig. 1
to
)
Unscrew the 6 screws using a No. 10 tube
spanner or a straight-edged screwdriver.
Remove the clamp.
Free the power cable from the plastic holder
clipping it to the transport clamp.
Plug the holes left by the clamp using the plugs
supplied and re-screw the 4 external screws into
the casing.
2 / INSTALLING YOUR MACHINE
•SAFETY ADVICE (continued)
— Do not let children play with the machine and
keep your pets away from it.
— You must immediately make any obsolete
machine unusable. Disconnect and cut off the
power cable flush with the machine. Close the
water tap and remove the hose. Disable the door
lock.
— If there is a risk of frost, disconnect the water
hose and drain off any water that may remain in the
drain hose by placing this as low as possible in a
bowl.
For washer-dryers:
— Before drying, remove the detergent dispensers
placed in the drum with your washing. Their plastic
material cannot withstand the drying temperatures.
•SAVING ENERGY
— Only programme a prewash when it is absolutely
necessary: for example, for very dirty sports or
working clothes, etc.
— A low temperature programme is sufficient for
impeccable washing results when your washing is
only slightly or moderately dirty.
— For washing that is only slightly dirty, select a
short washing cycle.
— Use the right amount of washing products for the
hardness of the water, the amount of washing and
how dirty it is and follow the instructions on the
detergent packs.
For washer-dryers:
— If you spin at high speed, little dampness will
remain and you will therefore consume little
electricity. Even synthetic textiles can be spun
before drying.
— Choosing your drying time well also helps to save
water and electricity.
— Avoid wasting water and electricity by not over-
drying your laundry.
ENVIRONMENTAL PROTECTION
T
his appliance’s packaging material is
recyclable. Help recycle it and protect the
environment by dropping it off in the municipal
receptacles provided for this purpose.
Your appliance also contains a great
amount of recyclable material. It is
marked with this label to indicate that
in countries that are a members of the
European Union the used appliances should
not be mixed with other waste.
This way, the appliance recycling organised
by your manufacturer will be done under the
best possible conditions, in compliance with
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment. Contact
your town hall or your retailer for the used
appliance collection points closest to your
home.
We thank you doing your part to protect the
environment.
1
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brandt WTD 1276 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brandt WTD 1276 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brandt WTD 1276

Brandt WTD 1276 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info