Manual Brandt UFB1000E (page 17 of 41) (English, German, Dutch, French, Portuguese, Spanish)

638902

Zoom out

Zoom in

1/41

compressor at the back of the appliance heat up

considerably. For safety reasons, minimum

ventilation must be as shown in the relevant

paragraph.

Attention: keep ventilation openings clear

of obstruction.

■

If the appliance is transported horizontally, it is

possible that the oil contained in the

compressor flows in the refrigerant circuit. It is

advisable to wait at least two hours before

connecting the appliance to allow the oil to

flow back in the compressor.

■

There are working parts in this product which heat

up. Always ensure that there is adequate

ventilation as a failure to do this will result in

component failure and possible food loss. See

installation instructions.

■

Parts which heat up should not be exposed.

Wherever possible the back of the product should

be against a wall.

■

If the appliance has been transported horizontally,

it is possible that the oil contained in the

compressor flows in the refrigerant circuit. It is

advisable to wait at least two hours before

connecting the appliance to allow the oil to flow

back in the compressor.

Environment Protection

■

This appliance does not contain gasses which

could damage the ozone layer, in either its

refrigerant circuit or insulation materials.The

appliance shall not be discarded together with

the urban refuse and rubbish. Avoid damaging

the cooling unit, especially at the rear near the

heat exchanger. Information on your local

disposal sites may be obtained from your

municipal authorities.

■

The materials used on this appliance marked

with the symbol are recyclable.

DESCRIPTION OF THE APPLIANCE

➀➀

Air outlet duct

➁➁

Freezer controls

➂➂

Air inlet filter

➃➃

Comparments for storing frozen food

➄➄

Compartments for freezing fresh food

➀➀

➁➁

➂➂

➃➃

➄➄

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt UFB1000E in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt UFB1000E Manual

Product: