Manual Brandt TE1074X (page 15 of 20) (English, French)

487532

Zoom out

Zoom in

1/20

INSTRUCTIONS FOR THE USER

It is necessary that all the operations regarding the installation, adjustment and

adaptation to the type of gas available are carried out by qualified personnel, in

conformity with the regulations in force.

The specific instructions are described in the booklet section intended for the

installer.

USING THE BURNERS

The symbols silk-screen printed on the side of the

knob indicate the correspondence between the

knob and the burner.

Automatic start-up with valves

Turn the corresponding knob anticlockwise up

to the maximum position (large flame, fig. 1) and

press the knob.

Once the burner has

been started up, keep

the knob pressed for

about 6 seconds.

Using the burners

In order to obtain the

maximum yield without

waste o f gas, i t is

important that the diameter

of the pot is suitable for the burner potential (see

the following table), so as to avoid that the flame

goes out of the pot bottom (fig. 2).

Use the maximum capacity to quickly make the

liquids reach the boiling temperature, and the

reduced capacity to heat food or maintain boiling.

All of the operating positions must be chosen

between the maximum and the minimum ones,

never between the minimum position and the

closing point.

Use the maximum capacity to quickly make the

liquids reach the boiling temperature, and the

reduced capacity to heat food or maintain boiling.

All of the operating positions must be chosen

between the maximum and the minimum ones,

never between the minimum position and the

closing point.

The gas supply can be interrupted by turning the

knob clockwise up to the closing position.

If there is no power supply, it is possible to light the

burners with matches, setting the knob to the start-

up point (large flame, fig. 1).

BURNERS Power W Ø of pots

Auxiliary

1000 10 - 14 cm

Semi-rapid

1750 16 - 18 cm

Rapid

3000 20 - 22 cm

Triple crown

3800 24 - 26 cm

Notice

When the equipment is not working, always check -

that the knobs are in the closing position (see

fig.1).

If the flame should blow out accidentally, the safety -

valve will automatically stop the gas supply, after a

few seconds. To restore operation, set the knob to

the lighting point (large flame, fig. 1) and press.

While cooking with fat or oil, pay the utmost -

attention as these substances can catch fire when

overheated.

Do not use sprays near the appliance in operation. -

Do not place unstable or deformed pots on the -

burner, so as to prevent them from overturning or

overflowing.

Make sure that pot handles are placed properly. -

When the burner is started up, check that the -

flameis regular and, before taking pots away,

always lowerthe flame or put it out.

Fig.1

Fig.2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt TE1074X in the language / languages: English, French as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt TE1074X Manual

Product: