Manual Brandt te 612 xs1 (page 29 of 48) (English, French)

336234

Zoom out

Zoom in

1/48

This appliance should be installed by

a qualified technician / installer.

Prior to installation, ensure that the

local distribution conditions (nature

of the gas and gas pressure) and the

adjustment conditions of the

appliance are compatible.

These hobs are designed to be used by

private individuals in their homes.

The adjustment conditions are stated on

a label in the wallet and also on the

packaging.

This appliance must be installed and

connected in compliance with the

regulations in force, and used only in a

well-ventilated area. Consult the

instructions before installing and using

this appliance.

Installing your hob in all simplicity

Since this appliance is not connected to a

combustion products evacuation device.

Particular attention should be given to the

relevant requirements regarding

ventilation.

On this subject, combustion can take

place only if oxygen from the air is

present, so this air must be constantly

renewed and the combustion products

must be evacuated (a minimum air input

of 2 m3/hour per kw of gas energy is

required).

These hobs have type X protection (in

accordance with standard EN 60.335.2.6)

against overheating of cupboards and

Class 3 for installation itself (in

accordance with standard EN 30.1.1).

Fitting recommendations

Standard cutout

Model

Width

Depth Height

Depending on the unit

Outside

dimensions above

the work surface

60 cm

53 cm

5,8 cm

Outside

dimensions below

the work surface.

55 cm 47,5 cm 3,4 cm

49 cm

56 cm

99628882_A_ML.qxp 18/07/2006 15:20 Page 29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt te 612 xs1 in the language / languages: English, French as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt te 612 xs1 Manual

Product: