48
Reversing the door
The side at which the door opens can be changed from the right side (as supplied) to the left side, if the
installation site requires.
Warning! When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
Tilt the appliance slightly towards the rear and prop it
securely.
Unscrew the door hinge screws (K) and remove the hinge
pin bracket (1).
Open the door a little way and take it out downwards.
Unscrew the upper pin (A) and screw it into place on the
opposite side.
Fit the door into the upper pin (A) and close it.
Screw the hinge pin bracket (1) securely into place on
the opposite side using the screws (K).
Unscrew the handle. Refit it on the opposite side after
having pushed in the plugs with a punch. Cover the
holes left open with the plugs contained in the docu-
mentation pack.
☞
☞
☞
☞
☞
☞
☞
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and
Care”).
Remove the ice pack from the appliance.
Only put the ice pack to freeze in the top drawer after the optimal storage temperature of –18 °C has
been reached.
Re-freeze thawed ice packs in the same way, e. g. after cleaning the appliance.
☞
☞
☞
☞
