Manual Brandt sa 1650 e (page 9 of 12) (English)

340734

Zoom out

Zoom in

1/12

6. Place guide (A) on the inside part of the furniture

door, up and down as shown in the figure and

mark the position of external holes. After having

drilled holes, fix the guide with the screws

supplied.

8. Open the appliance door and the furniture door at

90¡. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with ¯ 2 mm

at 8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

20mm

50mm

PR166

PR33/2

8mm

PR167

4. Snap vent grille (B) and hinge cover (E) into

position.

Apply covers (C-D) on joint cover lugs and into

hinge holes.

5. Separate parts A, B, C, D as shown in the figure.

PR266

3. Open the door and push the appliance against the

side of the kitchen unit opposite to that of ap-

pliance hinges. Fasten the appliance with 4

screws (I) provided in the kit included with the

appliance.

7. Fix cover (C) on guide (A) until it clips into place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt sa 1650 e in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brandt sa 1650 e

Brandt sa 1650 e User Manual - German - 12 pages

Brandt sa 1650 e User Manual - Dutch - 13 pages

Brandt sa 1650 e User Manual - French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt sa 1650 e Manual

Product: