Manual Brandt DHG990XFIM (page 22 of 84) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

487404

Zoom out

Zoom in

1/84

Replacing the light bulbs

1. Switch off the extractor hood and pull

out the mains plug or switch off the

electricity supply at the fuse box

When switched on, the halogen bulbs

become very hot. Even for some time after

the bulbs have been switched off there is

stil a risk of burns.

2. Follows the steps shown in the L

Series for replacing the lamps.

3. Replace the damaged halogen light

bulb wth a new one with same

characteristics.

4. Plug the appliance into the mains or

switch it on at the fuse box.

Note: if the light does not function, check

that the bulbs have been inserted

correctly.

If you encounter a problem

If a or appears in the display:

 See “Filters and Maintenance“

Section.

If it is not possible to operate the

extractor hood:

 Disconnect the extractor hood from

the mains electricity supply by pulling

out the plug or switching it off at the

main fuse box. Wait for approx. 1

Minute and then switch it on again.

If the lights of the lamps is weak when the

hood is in stand-by, then invert the plug

(invert phase with neutral).

If you have any questions or if a fault

occurs, please call Customer Service.

(see list of Customer Service

representatives).

When you call please quote the following:

E-Nr. FD

Enter the relevant numbers into the box

above. The E-Nr. (Product no.) and FD

(Production date) are shown on the

nameplace which can be seen inside the

extractor hood after the filter frame has

been detached.

The manufacturer of the extractor

hood accepts no liability for complaints

which can be attributed to the design

and layout of the pipework.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt DHG990XFIM in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt DHG990XFIM Manual

Product: