Manual Brandt DFF910JE1 (page 13 of 56) (English, German, Dutch, French, Portuguese, Spanish)

487474

Zoom out

Zoom in

1/56

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in

either its refrigerant circuit or insulation

materials. The appliance shall not be dis-

carded together with the urban refuse

and rubbish. The insulation foam con-

tains flammable gases: the appliance

shall be disposed according to the ap-

plicable regulations to obtain from your

local authorities. Avoid damaging the

cooling unit, especially at the rear near

the heat exchanger. The materials used

on this appliance marked by the symbol

are recyclable.

Control panel

1 2 3 4 5

1 Pilot light

2 Temperature regulator

3 Fast Freeze light

4 Fast Freeze switch

Acoustic alarm reset switch

5 Alarm light

Switching on

1. Insert the plug into the wall socket.

2. Turn the Temperature regulator clock-

wise to a medium setting.

3. The Pilot light will light up and a sound is

on only for 2 sec. indicating that the ap-

pliance is powered.

4. The Alarm light will blink and the sound

signal alarm will get on, indicating that the

temperature inside the appliance is too

high.

5. Push the Fast Freeze switch and the

sound signal alarm will get off.

6. Push the Fast Freeze switch once again

and the Fast Freeze light will light up. The

freezer will start to operate.

Switching off

1. To turn off the appliance, turn the Tem-

perature regulator to the "O" position and

a sound is on only for 2 sec.

2. The pilot light will switch off.

Temperature regulation

The temperature within the appliance is con-

trolled by the Temperature regulator situated

at the bottom of the cabinet.

To operate the appliance, proceed as fol-

lows:

• turn the Temperature regulator toward

lower settings to obtain the minimum cold-

ness.

• turn the Temperature regulator toward

higher settings to obtain the maximum

coldness.

A medium setting is generally the most

suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside

the appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

Fast Freeze function

You can activate the Fast Freeze function by

pressing the Fast Freeze switch.

The Fast Freeze light will light up.

It is possible to deactivate the function at any

time by pressing Fast Freeze switch.

The Fast Freeze light will switch off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt DFF910JE1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt DFF910JE1 Manual

Product: