Manual Brandt B3220HD (page 49 of 97) (English, Dutch, French)

659058

Zoom out

Zoom in

1/97

Getting started

English - 48 -

Turning the TV on

Connect the power cord to a 220-240V ~ 50 Hz socket.

To turn on the TV from standby mode, you can either :

• Press the “ ”, P+ / P- button or a numeric button

on the remote control,

• Press the side control button until the TV leaves

standby mode.

Turning the TV off

Press the “ “ button on the remote control or the

control button on the side of the TV until the TV enters

standby mode.

To turn off the television completely, unplug the

power cord from the power socket.

Note: When the television is in standby mode , the indicator

light ashes to indicate that options such as Standby search

mode, automatic download or Timer are enabled. The

LED may also ash when you turn on the television from

standby mode.

First time installation

When you turn on the television for the rst time,

the language selection menu appears. Select the

language you want and press OK.

The First time installation (FTI) screen appears

during rst installation. Set your preferences using

the navigation buttons. When you are nished, press

OK to continue.

IMPORTANT : If you select France or Italy as country

option, the PIN code menu will appear and you will

have to enter 4-digit code. You will not be able to use

0000 as code (you are advised to write down this

code. Enter a PIN code and enter it again to conrm

(you are advised to write down this code on your

instruction manual so that you can remember it when

you need to use it). Press the OK button to continue.

WARNING : When prompted to enter a PIN code to

access a menu item, you have to use the code you

set during rst installation. If you forget the said code,

use the main code 4725.

Demo Mode

If you want to use your television at home, you are

advised to select the Home mode.

If you choose the Store mode, you will have to conrm

your choice.

Choosing TV receiver mode

You will have to choose your reception mode, antenna

or cable. If you choose the AERIAL option from the

Type of search screen, the digital television will

search for digital terrestrial broadcasts.

NOTE: You can press the MENU button to cancel.

Once all the available channels have been saved, the

channel list will appear on the screen. If you require

the channels to be sorted according to the LCN(*),

select Yes, then press OK.

Press the MENU button to exit the list of channels

and watch television.

(*) LCN is the Logical Channel Number system

that displays channels in the order established by

government agencies .

Installing the cable

If you choose the CABLE option and press the

OK button on the remote control, you can set

the frequencies manually or press OK to start an

automatic search.

Note: The duration of the search will depend on the search

zone selected.

Reading media through the USB input

You can connect external hard drives (hard drives with or

without external power supplies, depending on their voltage)

or a USB port to your TV through your TV's USB ports.

IMPORTANT! Backup your les before making any

connection to the TV. Note that the manufacturer

shall not be held accountable for any le damage

or data loss. Some types of USB devices (MP3

players for example) or USB ‘‘hard drives / memory

cards’’ may be incompatible with this television. This

television supports FAT32 and NTFS disk formatting.

However, you will not be able to record with NTFS

formatted disks.

If your hard drive's capacity is above 1TB (terabyte),

you may experience some issues with formatting.

Avoid disconnecting your reader quickly after inserting

it in the television's USB port. This can physically

damage the USB reader and the USB device itself.

Never remove the USB while a le is being read.

First time installation - USB connections

Downloaded from www.vandenborre.be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt B3220HD in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 9,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt B3220HD Manual

Product: