714480

Brandson 301801 Manual

28
Zoom out
Zoom in
Previous page
1/72
Next page
28 English
the holes. Then, install the wall bracket (2) with the corresponding self-tapping
screws (3).
Connect the wall bracket to the heang element (C) and x the two elements
using the thumbscrew (5).
8 Usage
Keep the heater at an appropriate locaon and connect the device to a properly
installed 220-240V AC socket. By pping the protecve cage, you can change the
angle of inclinaon according to your needs.
Flip the switch (14) on the back of the control unit to "1" to acvate the device. The
heang process is not yet complete! The device is inially in input mode.
By pressing the ON buon on the remote control or the control panel, you can turn
on the rst level. By pressing the "MODE" buon, you can increase the level, or
reduce the level from the highest to the lowest. If you press the OFF buon on the
remote control, the device is not switched o completely. It goes to a power-saving
standby mode and can be acvated again at anyme.
Due to the lt protecon it switches itself o.
9 Cleaning
Pull out the power plug from the socket before starng with the cleaning process.
Use a slightly damp cloth for cleaning. The device should not be immersed in wa-
ter for cleaning under any circumstances. This could lead to electric shock or re!
10 Safety instrucons and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not cered
for use in the open air; only use it in dry condions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibraon as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe naonal regulaons and restricons. Do not use the device
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brandson 301801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brandson 301801 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info