Manual Brabantia D1S-3T (page 8 of 33) (German, Dutch, French)

683712

Zoom out

Zoom in

1/33

USING YOUR KETTLE

Before using this product, please read this manual carefully and adhere to all

instructions.

Before using the Kettle for the ﬁrst time ﬁll the Kettle with water to up to the maximum

indicator mark, boil and discard the boiling water. Repeat this instruction twice before

using the kettle.

1. Ensure that the Kettle is unplugged.

2. Open the lid and ﬁll with cold water.

3. Never ﬁll the Kettle when it is on the power base.

4. Fill the Kettle with the desired amount of fresh water. Ensure that the kettle, power

base and cord are dry and put the kettle on the base.

5. Ensure that the water level is ﬁlled above the minimum water level mark and that it

does not exceed the maximum water level mark.

6. When the Kettle has been ﬁlled with water, place it ﬁrmly on its base.

7. Ensure that the lid is properly closed by pressing it down ﬁrmly to close.

8. Turn on the switch. Do not turn on the kettle switch before placing the kettle on the

base.

9. When the water has boiled, the Kettle will switch OFF automatically.

10. The Kettle may be switched OFF at any time by turning the ON/OFF switch to the off

position.

11. Do not pour the water out of the Kettle before the water inside the kettle stops

boiling.

12. Take care not to be scalded by boiling water.

13. If the kettle shuts down automatically before boiling, this indicates that there is too

much scale in the Kettle and that it should be descaled.

COLOUR CHANGING LED LIGHTS

The LED on the thermal plate lights up blue when switched on, changes to purple as the

water heats up and turns red when the water starts boiling.

TROUBLESHOOTING

Problem

Kettle switches off

automatically before

boiling

The kettle does not work

There is a peculiar smell

inside the kettle

There is dirty water or

water scale inside the

kettle

Solution

1. Check if there is scale build-up. If so, descale

as instructed.

2. Check if there is enough water in the kettle. If

not, boil dry protection will automatically be

activated. To reset the kettle, add cold water

to the kettle and after about 2 mins the

automatic protection device will reset and the

kettle will work.

1. Check if the connecting plug and socket are in

good working order.

2. If the power cord is damaged, it must be

replaced by an original factory part from an

authorised service centre.

3. When the kettle starts to boil dry, the

automatic boil dry protection device will shut

the power off. Reset as above.

1. Occasionally there is an initial odour when the

kettle is used for the ﬁrst time. Boil and discard

the water a few times before using again.

2. If this problem persists, ﬁll water to the

maximum mark, add two spoons of baking

soda to the water, boil and discard the water

after boiling.

1. Scale build-up is common in hard water areas

and is caused by calcium carbonate and

magnesium carbonate. Descale the kettle

regularly.

CLEANING AND MAINTENANCE

1. Remove the mains plug from the mains electrical supply before cleaning.

2. Never immerse the Kettle, power cord or plug in water or any other liquid.

3. Clean the exterior by wiping with a slightly dampened cloth and immediately wipe

dry. Never use solvents, polish, abrasives or aerosol cleaners as they will damage the

surface of the Kettle

4. Ensure that the Kettle, power base and cord are completely dry before switching on

the Kettle.

HOW TO ELIMINATE SCALE

In order to keep the Kettle in good working order the scale must be frequently removed. If

the Kettle switches off before boiling, it must be descaled.

To descale, ﬁll the Kettle with 1L cold water and add approximately 75ml vinegar.

Boil the water and allow it to stand overnight.

Re-boil the water the next day.

Empty the Kettle and ﬁll with fresh water. Boil the water and then empty the kettle again.

Normal commercial descalers may be used. Follow the instructions on the packaging very

carefully.

SPECIFICATIONS

Rated voltage/ Frequency: 220-240V~50/60Hz

Rated power: 2000-2400W

ENVIRONMENT FRIENDLY DISPOSAL

This marking indicates that this product should not be disposed of with other

household waste. To prevent possible harm to the environment or human health

from uncontrolled waste disposal, recycle it responsibly to promote the

sustainable re-use of material resources. To dispose of your appliance correctly,

please contact or take it to your local refuse/recycling centre. Alternatively,

contact your local council for information on your local re-use centre.

WARRANTY

THE WARRANTY WILL ONLY BE VALID IF THE PRODUCT IS RETURNED WITH A PROOF OF

PURCHASE TILL SLIP AND ORIGINAL PACKAGING.

Warranty exclusions:

The warranty will not be valid if:

1. The product has not been installed, operated or maintained in accordance

with the manufacturer's operating instructions provided with the product.

2. The product has been used for any purpose other than its intended function.

3. The damage or malfunction of the product is caused by any of the following:

- Incorrect voltage

- Accidents (including liquid or moisture damage)

- Misuse or abuse of the product

- Faulty or improper installation

- Mains supply problems, including power spikes or lightning damage

- Infestation by insects

- Tampering or modiﬁcation of the product by persons other than

authorised service personnel

- Exposure to abnormally corrosive materials

- Insertion of foreign objects into the unit

- Usage with accessories not pre-approved by Brabantia

- General wear and tear, including, but not limited to, minor discolouration

and scratches

Please refer to and heed all warnings and precautions in this Instruction

Manual.

Due to continuous product development, speciﬁcations may be subject to

change without prior notiﬁcation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brabantia D1S-3T in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brabantia D1S-3T Manual

Product: