589741
54
Zoom out
Zoom in
Previous page
1/79
Next page
English
54
WitboxUser Manual
4
Open the printer’s main menu and select Control > Filament > Load. The Hot-End
will be heated to 220 °C. This will also heat up any plastic residue that may be
blocking extrusion of the melted lament.
5
Insert a 1.5mm Allen key into the connector and push downwards in order to expel
any leftover lament.
Do not leave the Allen key inside the connector for an extended period of time,
as the heat may cause it to expand and block the connector.
6
Insert one of the needles (supplied with the printer) into the nozzle and drag out
any leftover lament that may be there (g. 6.3).
Take care when performing this action and avoid touching the nozzle with your
hands, as it is extremely hot.
7
Check that the tip of the needle is able to emerge from the top of the connector.
8
Move the needle up and down in order to make sure the nozzle is entirely free of
leftover material.
9
To check that the nozzle has been cleaned correctly, load the lament again and
perform a test print.
Remember that the lament must be extruded from the nozzle in a constant,
uniform stream.
Figure 6.3 Insert a needle into the nozzle
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BQ Witbox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BQ Witbox in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BQ Witbox

BQ Witbox User Manual - German - 79 pages

BQ Witbox User Manual - French - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info