737220
21
Zoom out
Zoom in
Previous page
1/28
Next page
Bowflex Xtreme® 2 SE Assembly Manual 17
Assembly Guide
Step 18 Cable and Pulley Routing – Connect Pulleys and Cables to the Lat Pulley
Housing
Locate the following items for the Lat Pulley Housing assembly:
(2) Pulleys from step 17
3/8” X 4 1/2” Hex Head Bolt – uninstalled in Step 17
3/8” Washer – uninstalled in Step 17
Note: Connecting the Cables is much easier with a second persn assisting you.
18-1 Holding both Cables from Step 17 in place, align the 2 Lat Pulleys as shown in Figure 18. Slide the Pulleys
back into the Lat Pulley Housing, lining up the bolt holes in the Pulleys and Lat Pulley Housing.
18-2 Place the Washer over the 4 1/2” Bolt from Step 17. Slide the Bolt through the aligned holes in the Lat Pulley
Housing and Lat Pulleys as shown in Figure 18.
Tighten all hardware.
Note: You will probably need to push the Power Rod® unit out of the way for this step. The Power Rod® unit is
not pictured for the sake of clarity.
2
2
1
1
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex Xtreme 2 SE - before 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex Xtreme 2 SE - before 2013 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex Xtreme 2 SE - before 2013

Bowflex Xtreme 2 SE - before 2013 User Manual - English - 68 pages

Bowflex Xtreme 2 SE - before 2013 Installation Guide - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info