737220
18
Zoom out
Zoom in
Previous page
1/28
Next page
14 Bowflex Xtreme® 2 SE Assembly Manual
Step 15 Install Upper Lat Tower Assembly, Ab
Crunch Station and Lat Pulley
Parts:
Upper Lat Tower Assembly
Ab Crunch Station
Lat Pulley Housing
Main Assembly
Hardware:
5 Button Head Screws (3/8" X 3/4")
5 Flat Washers (3/8")
Tool: 7/32" Hex Wrench
15-1 Slide the Upper Lat Tower Assembly onto the Lower
Lat Tower as shown.
15-2 Place the Ab Crunch Bracket against back of the
Lat Tower Assembly. Align the bolt holes on the Ab
Crunch Brackets side flaps with the lower bolt holes
on the sides of the Lat Tower.
15-3 To attach the Ab Crunch Station to the Lat Tower,
install a 3/4” screw and washer through the upper bolt
hole on the Ab Crunch Station into the back of the Lat
Tower as shown in Detail 15a. Secure the Ab Crunch
Station to the sides of the Lat Tower with 2 screws
and washers as shown in Detail 15a.
15- 4 Remove the plastic cap from the end of the the long
bolt already installed in the back of the Lat Pulley/
Housing. Finger tighten the boltit will be removed
and reinstalled during Step 17 and 18.
15-5 Position the Lat Pulley Housing bracket against the
Lat Tower, over the Ab Crunch Station. Align the bolt
holes as shown in Figure 15b.
15-6 Place one washer over the end of each screw. Attach
the Lat Pulley Housing to the Lat Tower by installing
the screws loosely into the aligned holes as shown in
Figure 15b.
Do not tighten hardware at this time.
Ab Bracket on Lat
Tower
Assembly Guide
Detail
15a
Figure 15b
Figure 15a
Lat Pulley Housing
Long Bolt
Flat Washer
Button Head Screw
Washer
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex Xtreme 2 SE - before 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex Xtreme 2 SE - before 2013 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex Xtreme 2 SE - before 2013

Bowflex Xtreme 2 SE - before 2013 User Manual - English - 68 pages

Bowflex Xtreme 2 SE - before 2013 Installation Guide - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info