737206
9
Zoom out
Zoom in
Previous page
1/24
Next page
Troubleshooting
Problem Solution
Dumbbell handle does not fully insert into base
when no plates are selected (handle has no plates
attached).
1. Make certain that both adjustment knobs are set directly to the number 2.
Dumbbell handle does not fully insert into base when
plates are selected (handle has plates attached).
1. Check to see if you have selected different weights on each side of the dumbbell
(for example one adjustment knob is set to 2 and the other is set to 3). If this is
the case, you must replace the dumbbell in the base with the same orientation
from which it was withdrawn. This is to allow the plates to settle back into the
correct and vacant openings in the base.
2. Verify that the plates not selected (those plates remaining in the dumbbell
base) are in their correct spots and have not been moved to different support
slots. This may be blocking the dumbbell from fitting back into the base.
Adjustment knob will not turn while handle is in base. 1. Check to assure that the dumbbell handle is fully depressed into the dumbbell
base. If not fully depressed, the locking mechanism will not be released and
may prevent the adjustment knobs from rotating.
2. Check to see if any weight plates have been put into the base assembly
backwards with the “Locking Tab” facing the grip of the dumbbell handle. All
weight plates must have the selection tongue facing away from the grip of the
dumbbell handle.
3. Check to see if there is any dirt, debris or other obstruction in the dumbbell
base. You may need to remove the weight plates from the base to accomplish
this check. Remember to put each weight plate back in its appropriate location
with the selection tongue facing away from the dumbbell grip.
Plates are not secured to the handle and drop out. 1. Confirm that all of the weight plates have the “Locking Tab” facing away from
the dumbbell grip. If one or more of the weights are inserted backwards with
“Locking Tab” facing inward toward the grip, the handle can get blocked, and
the plates may wedge into the handle.
2. Verify that the plates not selected (those plates remaining in the dumbbell
base) are in their correct spots and have not been moved to different support
slots. This may be blocking the dumbbell from fitting back into the base.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex SelectTech BD552i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex SelectTech BD552i in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex SelectTech BD552i

Bowflex SelectTech BD552i User Manual - German - 24 pages

Bowflex SelectTech BD552i User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info