737206

Bowflex SelectTech BD552i Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
Operation
Getting to know your Bowflex
®
SelectTech
®
Dumbbells
The Bowflex
®
SelectTech
®
dumbbells are shipped fully assembled, one dumbbell to a box. After carefully removing the dumbbell from its box,
there are some initial steps that should be taken to familiarize you with the function of the product, and to make sure that all features of the
dumbbell operate correctly.
Do not drop the dumbbell. Dropping the dumbbell will damage the weight plates and/or the locking mechanism, and can
cause the weight plates to disengage (drop) from the handle without warning. This can cause serious injury, and will void the
warranty.
1. After you remove the dumbbell from its protective packaging, inspect the products and packaging material for damage.
2. Push down slightly on the handle assembly to make sure it is fully seated in the base. Rotate each adjustment knob several full
rotations to make sure it turns freely in both directions. Make sure there is a click at each weight increment of the adjustment knob.
This click will help you align the knob correctly to make a weight selection.
3. The weight increments range from 2 kg to 24 kg (5 to 52.5 lbs) on both adjustment knobs. To
properly select a given weight (9 kg [20 lbs] for example), rotate both adjustment knobs until that
number (9) is aligned with the arrow located on the outward edge of the Bowflex
®
nameplate
(Fig.1).
4. After you make sure that the adjustment knob turns correctly, turn each adjustment knob so that the
number 2 is aligned with the arrow in the Bowflex
®
nameplate.
5. With both adjustment knobs set to 2, pull the handle straight up from the dumbbell. This will
remove only the handle from the base, and let all of the weight plates stay in the base (Fig. 2).
The handle without plates gives the initial weight of 2 kg (5 lbs).
6. You may increase the selected weight by rotating each adjustment knob clockwise.
NOTICE: When you remove the dumbbell from the base or return it to the base, use a vertical
motion, perpendicular to the base. Do not tilt the dumbbell or move it laterally (parallel
to the base) until it is fully clear of the unselected weight plates.
Note: The dumbbell handle and weight plates are symmetrical. The handle is inserted with either
end facing the user, provided that you have selected the same weight number on both ends
of the dumbbell.
Do not lean on the dumbbell handles or use them to support your body weight , such as using
them as a base to perform a push up. Doing so will damage the weight plates and/or the
locking mechanisms, and can cause the weight plates to disengage (drop) from the handle
without warning. This can cause serious injury, and will void the warranty.
Inspect the dumbbells prior to each use. Do not use a dumbbell with worn or damaged parts. Contact your local distributor for repair
information.
Note: Weight increments represent estimated values only. Exact values can vary due to manufacturing variances.
Figure 1
Figure 2
There are 15 weight increments:
2 3 4 5 7 8 9 10 11 14 16 18 20 23 24
(5 lbs) (7.5 lbs) (10 lbs) (12.5 lbs) (15 lbs) (17.5 lbs) (20 lbs) (22.5 lbs) (25 lbs) (30 lbs) (35 lbs) (40 lbs) (45 lbs) (50 lbs) (52.5 lbs)
5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex SelectTech BD552i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex SelectTech BD552i in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex SelectTech BD552i

Bowflex SelectTech BD552i User Manual - German - 24 pages

Bowflex SelectTech BD552i User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info