737197
32
Zoom out
Zoom in
Previous page
1/52
Next page
Assembly / Owner’s Manual
32
Todismountyourtnessmachine:
1. Move the Pedal you want to dismount from to the highest position, and bring the machine to a complete stop.
This machine is not equipped with a free-wheel. Pedal speed should be reduced in a controlled manner.
2. Grasp the Static Handlebars under the Console to steady yourself.
3. Withyourweightonthelowestfoot,swingtheupperfootoffthemachineanddownontotheoor.
4. Step off of the machine and release your grip from the Static Handlebars.
Getting Started
1. Placethetnessmachineinyourworkoutarea.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may hamper your ability to
move freely. A rubber mat can be used below the machine to prevent the release of static electricity and protect your ooring.
The machine can be moved by one or more persons. Make sure that your own physical strength is capable of safely moving the
machine.
2. ExamineforanyobjectsbelowthePedalsandintheAirResistanceFan.Besureitisclear.
3. Connect the power cord to the machine and into a grounded AC Wall Outlet.
4. If you use a Heart Rate Monitor, follow the Heart Rate Monitor directions.
5. To mount the machine, move the Pedals until the one nearest you is in the lowest position.
Care should be used when mounting or dismounting the machine.
Be aware that the Pedals and the Handlebars are connected and when either of these parts move the other does as well. In order to
avoid possible serious injury, grasp the Static Handlebars to steady yourself.
6. GrasptheStaticHandlebarsundertheConsoleButtonAssembly.
7. Steadying yourself with the Static Handlebars, step up onto the lowest Pedal and place your other foot onto the opposite Pedal.
Note:“Bottomedout”iswhentheUserisunabletostartaworkoutbecausethePedalswillnotmove.Ifthisoccurs,safelygrasptheStatic
Handlebars and apply your weight to the heel of the higher foot. While still grasping the Static Handlebar, lean back slightly applying
more weight onto the heel. Once the Pedals begin to move, resume your intended workout.
8. PushtheUSERbuttontoselectthedesiredUserProle.
9. PushandholdtheUSERbuttontoedittheUserProle.
10. The Console will display the Units value. Use the Increase/Decrease buttons to adjust the Units value, and push the ENTER/START button to
set the value.
11. TheConsolewilldisplaytheWeightvaluefortheUserProle.UsetheIncreaseandDecrease
buttons to adjust the weight value, and push the ENTER/START button to set the value.
Note:BesuretoprogramyourUserProle(seetheEditaUserProlesection)beforestartinga
workout.ThesuggestedTargetBurnRatesarebasedonyourUserProlesettings.
12. PushtheMax14MinuteIntervalbuttontobeginaQuickStartworkout.Allowtimetobecome
familiarwithhowyourBowex™MaxTrainer™machineoperatesandrespondstoadjustments
of Resistance Level and rpm.
Note: WhenoperatingtheBowex™MaxTrainer™machine,besuretheLegsaremovingin
the direction as shown on the Crank Cover.
Power-Up / Idle Mode ( GET READY screen )
The Console will enter Power-Up / Idle Mode if it is plugged into a power source, any button is pushed,
or if it receives a signal from the RPM sensor as a result of pedaling the machine.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex M6 Max Trainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex M6 Max Trainer in the language / languages: English as an attachment in your email.

The manual is 19,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex M6 Max Trainer

Bowflex M6 Max Trainer Usermanual and installation guide - German - 52 pages

Bowflex M6 Max Trainer Usermanual and installation guide - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info