737190
20
Zoom out
Zoom in
Previous page
1/64
Next page
Assembly / Owner’s Manual
20
7. Make sure that the locking mechanism is engaged. Carefully pull back on the walking deck and make sure that it does not move. When you do
this, keep clear of movement path in case the treadmill lock is not engaged.
Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become unstable or fall.
Do not connect the power cord or try to operate the treadmill in the folded position.
8. Stand to one side of the treadmill. Place your front foot so it pins the Base As-
sembly. Grasping the Side Handrail, carefully pivot the treadmill rearward until it is
balanced fully on the transport wheels. Be sure not to pivot the machine too far. Hold
the treadmill in the balanced position.
This step may require two persons on each side of the treadmill. The
treadmill is heavy and can be awkward. Make sure that your own physical
strength is capable of pivoting the machine.
Always wear fully enclosed shoes when moving this machine. Do not
move the machine with bare feet or only wearing socks.
Do not use the Console or lifted Walking Deck to pivot or move the tread-
mill. Injury to you or damage to the machine can occur.
Keep clear of the movement path of the lifted Walking Deck.
9. Grasping the Side Handrail and the front of the Upright, safely roll the treadmill
to the desired location.
The treadmill is heavy and can be awkward. Make sure that your own
physical strength is capable of moving the machine.
Place the machine on a clean, hard, level surface, free from unwant-
ed material or other objects that may hamper your ability to move
freely. A rubber mat should be used below the machine to prevent
the release of static electricity and protect your ooring.
Do not put objects in the path of the walking deck when lowered.
NOTICE: Move the machine carefully so that it does not hit other ob-
jects. This can damage the Console operation, the treadmill,
or the area around the machine.
10. Safely lower the treadmill into the desired position. Be sure there is adequate
space for the machine before lowering it.
11. Prior to use, refer to the “Unfolding the Machine” procedure in this manual.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex BXT226 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex BXT226 in the language / languages: English as an attachment in your email.

The manual is 13,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex BXT226

Bowflex BXT226 User Manual - German - 68 pages

Bowflex BXT226 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info