737204
55
Zoom out
Zoom in
Previous page
1/68
Next page
Assembly / Owner’s Manual
55
Leveler
Troubleshooting
Condition/Problem Things to Check Solution
No display/partial display/unit
will not turn on
Check electrical (wall) outlet Make sure unit is plugged into a functioning wall outlet. Test the outlet with a
known functioning device such as a lamp.
Check connection at front of unit Connection should be secure and undamaged. Replace power cord or con-
nection at unit if either are damaged.
Check data cable integrity All wires in cable should be intact. If any are visibly crimped or cut, replace
cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Check console display for
damage
Check for visual sign that console display is cracked or otherwise damaged.
Replace Console if damaged.
Console Display If Console only has partial display and all connections are ne, replace the
Console.
If the above steps do not resolve the problem, contact Customer Service (if
inside US/Canada) or your local distributor (if outside US/Canada).
Unit operates but Contact Heart
Rate (HR) not displayed
Sensor grip Be sure hands are centered on HR sensors. Hands must be kept still with
relatively equal pressure applied to each side.
Dry or calloused hands Sensors may have difculty with dried out or calloused hands. A conductive
electrode cream (heart rate cream) can help make better conduct. These are
available on the web or at medical or some larger tness stores.
If tests reveal no other issues, contact Customer Care for further assistance.
Unit operates but Telemetric HR
not displayed
Chest Strap Strap should be “POLAR
®
” compatible and uncoded. Make sure strap is
directly against skin and contact area is wet. Make sure the transmitter has
the curve oriented upward.
Check User Prole Select the Edit User Prole option for the User Prole. Go to the WIRELESS
HR setting and make sure that the current value is set to ON.
Interference Try moving unit away from sources of interference (TV, Microwave, etc).
Replace Chest Strap If interference is eliminated and HR does not function, replace strap.
Replace Console If HR still does not function, contact Customer Service (if inside US/Canada)
or your local distributor (if outside US/Canada).
Speed display is not accurate Display set to wrong unit of
measure. (English/Metric)
Change display to show correct units.
Speed does not adjust (machine
turns on and operates)
Check Console Check for visual sign that Console is damaged. Replace Console if damaged.
Lower and Upper I/O Cables
(requires console removal)
All wires in the cables should be intact. If any are cut or crimped, replace
cable.
Drive Belt Check to be sure drive belt is around drive pulley and motor; inspect tension.
If the above steps do not resolve the problem, contact Customer Service (if
inside US/Canada) or your local distributor (if outside US/Canada).
Incline does not adjust (machine
turns on and operates)
Check Console Check for visual sign that Console is damaged. Replace Console if damaged.
Lower and Upper I/O Cables
(requires console removal)
All wires in the cables should be intact. If any are cut or crimped, replace
cable.
Incline Adjuster Assembly
(requires cover removal)
Be sure Incline Adjuster Assembly is attached to Incline Motor drive screw.
If the above steps do not resolve the problem, contact Customer Service (if
inside US/Canada) or your local distributor (if outside US/Canada).
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex BXT028 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex BXT028 in the language / languages: English as an attachment in your email.

The manual is 18,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex BXT028

Bowflex BXT028 User Manual - German - 72 pages

Bowflex BXT028 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info