737204

Bowflex BXT028 Manual

45
Zoom out
Zoom in
Previous page
1/68
Next page
Assembly / Owner’s Manual
45
Changing Incline Levels
Push the Incline Level Increase() or Decrease() buttons to change the incline angle of the Deck at any time with the Safety Key installed. To
rapidly change the incline level push the desired Pre-Set Incline button, and then the Conrm Incline button. The Deck will adjust to the selected
incline setting.
Note: After a Pre-Set Incline button is pushed, the Confirm Incline button must be pushed within 12 seconds.
Be sure the area below the machine is clear before lowering the Deck. Fully lower the Deck after each workout.
Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in belt speed and incline angle of
deck can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.
Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the user and
the maximum height of the fully inclined Deck.
Changing the Walking Belt Speed
During a workout, the Walking Belt starts at 1.0 mph/kph. To adjust the speed of the Walking Belt, push the Speed Increase or Decrease button to
adjust by 0.1 mph/kph increments. Push and hold down the Speed Increase or Decrease button to adjust the increments quickly.
To rapidly change the Speed level push the desired Pre-Set Speed button, and then the Conrm Speed button. The Walking Belt will adjust to the
desired speed.
Note: After a Pre-Set Speed button is pushed, the Confirm Speed button must be pushed within 12 seconds.
Pausing or Stopping a Workout
1. With a rm hold on the Handlebars, step off of the belts and onto the Side Foot Support Platforms on either side of the Walking Deck.
2. Push PAUSE/STOP to pause the workout. The belts will slow to a complete stop.
Note: If a paused workout is not restarted in 5 minutes, the machine will end the workout and display the workout results.
3. To restart your workout, push the START button. To end your workout, push PAUSE/STOP again. The Console will display your workout results.
4. The Console will ask if you would like to save the workout as the Custom workout program. Use the Increase or Decrease buttons to modify the
option, and push Enter. After 5 seconds the Console will perform the currently selected option.
To prevent unsupervised operation of the machine always turn the power switch to Off, remove the Safety Key, and disconnect the
power cord from the wall outlet and machine power input. Place the power cord in a secure location.
Workout Complete / Results
When the goal of a workout is achieved the Console will display, “Workout Complete,” for two seconds and then bring the Walking Belt to a stop. The
Console will display the workout results.
Note: If a workout is completed with a USB Flash Drive already inserted, the Console will not export the new Workout Results until the
Console exits the Results mode and displays the Power-Up Mode screen. If the Console does not receive any further input after 5
minutes, the Console will shut off.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex BXT028 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex BXT028 in the language / languages: English as an attachment in your email.

The manual is 18,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex BXT028

Bowflex BXT028 User Manual - German - 72 pages

Bowflex BXT028 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info