If the Sound has been muted on a Speed Based workout program, the Console will display the “AUDIO OFF” prompt for a few
seconds.
Note: Your treadmill comes equipped with a durable, high quality walking belt designed to provide many hours of reliable service. The walking
belt on a treadmill that has not been operated for a length of time, either in factory packaging or after assembly, can exhibit a “thump-
ing” noise when started. This is due to the belt taking on the curve of the front and rear rollers. This is a common occurrence and does
not indicate a problem with your machine. After the treadmill has been used for a short period of time the thumping noise will discon-
tinue. The amount of time will vary depending on the temperature and humidity of the environment where the treadmill is placed.
As you use your fitness machine, the Console will show “LUBRICATE BELT” followed by “REVIEW USER MANUAL” at set times. This
is only a reminder and should be added to your inspection schedule. Only apply lubricant as necessary. Push any button to accept the
reminder.
Power Up / Idle Mode
The Console will enter Power Up mode when initially plugged into a power source and the On/Off button is switched to On.
The belts will only move after a 3 second, audible beep countdown unless muted.
Shut Off (Sleep Mode)
If the Console does not receive any input for ve minutes, it will automatically shut off.
Push any button to start (wake up) the Console.
To prevent unsupervised operation of the machine always turn the power switch to Off, remove the Safety Key, and disconnect the
power cord from the wall outlet and machine power input. Place the power cord in a secure location.
Initial Setup / Adjust Date and Time
During the rst power-up, the Console will request the date and time for workout tracking. To adjust these settings after the Initial Setup, push and hold
the Right () and PAUSE/STOP buttons from the Power-Up Mode screen.
1. The Console display shows the SET DATE prompt with the default date setting. The month value will be the currently active values (ashing).
Push the Increase () or Decrease () buttons to adjust the currently active value (ashing). Push the Left () or Right () buttons to change
which segment is the currently active value (month / day / year ).
2. Push the Right button until the next prompt is displayed.
3. The Console display shows the SET TIME prompt with the default time setting. The hour value will be the currently active values (ashing). Push
the Increase/Decrease buttons to adjust the currently active value (ashing). Push the Left/Right buttons to change which segment is the currently
active value (hour / minute / AM or PM).
4. Push Enter to set.
The Console goes to the Power-Up Mode screen.
User Proles
The Console is equipped with 2 User Proles. Each User Prole has values and options specic to it:
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bowflex BXT028 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bowflex BXT028 in the language / languages: English as an attachment in your email.
The manual is 18,07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
