581611
5
Zoom out
Zoom in
Previous page
1/98
Next page
5
ENGLISH
Diagram 5
Bluetooth setup
5. T7 audio inputs
T7 can play audio either wirelessly from a compatible
Bluetooth device or through a wired connection from
a device with an analogue output.
T7 will select between its Bluetooth and wired inputs
automatically although the Bluetooth input has
priority. The following input selection rules apply:
If T7 is connected via Bluetooth and a plug is
inserted in the Auxiliary input socket, T7 will
switch to the Auxiliary input.
If T7 is playing audio through its Auxiliary input
and a Bluetooth stream is received or the
Bluetooth button is pressed, T7 will switch to the
Bluetooth input.
If T7 is playing audio through its Auxiliary input
and the cable is disconnected T7 will switch to
the Bluetooth input and attempt to connect to
the primary paired source device.
Note: If T7 is connected via Bluetooth while an
Auxiliary input cable is also connected, a new
analogue audio signal will not automatically
switch T7 to its Auxiliary input.
5.1 Bluetooth connection
To connect T7 to a Bluetooth enabled audio device it
must rst be “paired” with the device. Once paired, a
Bluetooth device and T7 will “remember” each other
and be able to connect when within range.
T7 will remember up to eight paired Bluetooth
devices. The rst paired device will be designated
as the “primary” device, additional devices will be
designated as “secondary” devices.
The primary device will be connected when within
range, and the T7 Bluetooth button is pressed.
Secondary devices will not connect automatically
when in range but must be connected via their
Bluetooth settings.
It is possible for two paired devices to be connected
to T7. However, audio will only be heard from one
device at any one time. When two devices are
connected the other device can override the active
stream.
To pair a Bluetooth device with T7 follow the steps
described below.
With T7 switched on, press and hold the
Bluetooth button for 2 seconds. The indicator
will ash and T7 will provide audible feedback
when it enters “pairing” mode.
Note: T7 will automatically exit from Bluetooth
pairing mode if no device is paired within 5
minutes.
Open the Bluetooth settings on the source device
and ensure Bluetooth is switched on. Once
discovered, Bowers & Wilkins T7 will appear as
an available Bluetooth device. Select T7 and close
the Bluetooth settings. T7 Bluetooth indicator will
ash as pairing is underway and illuminate fully
when pairing is established. T7 will also provide
audible feedback when pairing is established.
Note: If your Bluetooth audio source device does
not support “simple” pairing and requests a four
digit code, enter ‘0000’.
Once a connection has been established, ensure
that T7 is selected as the speaker output. Audio
will now be heard through T7.
2 seconds
Devices
Bowers & Wilkins T7
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins T-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins T-7 in the language / languages: All languages as an attachment in your email.

The manual is 10,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowers Wilkins T-7

Bowers Wilkins T-7 Quick start guide - English, German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info