704642
6
Zoom out
Zoom in
Previous page
1/113
Next page
6
ENGLISH
6. Bluetooth Connection
6.1 Pairing
PX7 is designed to stream media wirelessly from
Bluetooth audio devices, such as smartphones,
tablets or personal computers. To do so, the
headphone and device (source) must rst be paired.
1. The rst time you switch on your headphones,
Bluetooth pairing mode will be enabled,
the indicator will ash blue. If pairing mode
is not enabled, please slide and hold the
power switch to the upper (Bluetooth Icon)
position for 5 seconds, let go when the
indicator blinks blue and when an audible cue
is presented.
2. Ensure the Bluetooth feature is enabled on the
audio device, PX7 will appear in the discovery
list, select it to pair.
3. The indicator will ash blue while pairing is
in progress, this will change to solid blue
and an audible cue presented when pairing
is successful.
Your headphones will remember up to eight paired
Bluetooth devices. Repeat the above steps to pair
more devices.
Note: Your headphones will automatically exit
Bluetooth pairing mode if no device is paired
within 5 minutes. If pairing fails, the indicator will
rapid ash blue, please try pairing again.
6.2 Multiple Bluetooth Connections
PX7 can connect up to two devices at the same
time, but note that you can only play audio or take
calls from one device at a time.
To switch between two devices:
1. Pause audio on the rst device, or use the
PX7 multi-function button.
2. Play audio from the second device and the
headphone will switch over.
When streaming audio, receiving a call on the
second device will automatically pause playback
and the call will be routed automatically to your
headphones. Ending the call will automatically
resume playback from the rst device.
6.3 Disconnect from a Device
You can quickly disconnect PX7 from a device by
sliding the Power Switch to the upper (Bluetooth
Icon) position two times in quick succession, an
audible tone will be presented indicating successful
disconnection.
Alternatively, you can manage connection in further
detail using the Bowers & Wilkins Headphones app
under Connections.
6.4 Setting Up Headphones with the App
The Bowers & Wilkins Headphones app provides
extended setup and adjustments to features such as
Adaptive Noise Cancellation, Ambient Pass-Through,
and Wear Sensors. The app also provides further
customisations such as voice prompt, standby time,
connection management and headphone software
updates. The app is available as a free download on
iOS and Android devices.
To add your headphones:
1. From your mobile device, download and install
the Bowers & Wilkins Headphones app.
2. Launch the app, then read and follow
the instructions pertaining app notication
and permissions.
3. After reaching the main screen, simply tap +
and following the in-app instructions.
6.5 Headphone Software Updates
Bowers & Wilkins will occasionally make available
software updates that rene and optimise the
performance of your headphones or add
new features.
The Bowers & Wilkins Headphones app will notify
you when a software update is available, tap on the
notication and the follow in-app instructions.
Diagram 7
Bluetooth pairing
Devices
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins PX7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins PX7 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowers Wilkins PX7

Bowers Wilkins PX7 User Manual - English - 8 pages

Bowers Wilkins PX7 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info