704657
4
Zoom out
Zoom in
Previous page
1/104
Next page
4
ENGLISH
3. Battery Charging
PX headphones are shipped with battery power
and may be used immediately, however, it is good
practice to charge the battery fully before rst use. It
can take up to 3 hours for PX headphones to reach
full charge. However it is possible to use them while
the battery is charging.
Note: The indicator initially displays battery
charge when PX headphones are switched on.
Green indicates that the battery is above 50%
charged. Yellow indicates that the battery is
between 50% and 30% charged. Red indicates
that the battery is below 30% charged. If the
indicator blinks red, the battery charge is
insufcient for headphones operation. Indicator
illumination is fully described in Diagram 7.
Battery charging is described in the
following paragraphs:
Using the supplied USB charging cable, connect
the headphones to a powered USB socket: a
computer USB socket, a mains USB charger or
an in-car charger.
While charging, the headphone indicator will
blink green. As the level of charge increases
the illuminated period of the blink will get
longer. When fully charged the indicator will
remain illuminated.
4. Wearing Your Headphones
Using your headphones correctly will help ensure
that their performance reaches its full potential. First,
identify the left and right ear pieces. Identication
legends can be found on the lower inside of the
headband as illustrated in Diagram 3.
Place the headphones on your head with the
headband adjusted so that each ear piece sits
comfortably over the ear as illustrated in Diagram 4.
Ensure that the ear pieces are not pulling upwards
and causing unnecessary pressure on your head.
We recommended that you return your headphones
to their storage pouch when not in use.
Note: Wearing glasses that distort the prole
of your ears may interfere with headphone
Environment Filter performance. Similarly, hair
trapped between your ears and the headphone
ear-pieces may compromise proximity sensing.
5. Switching On and Off
To switch on your PX headphones, slide the power
button sideways as shown in Diagram 5.
Your PX headphones are designed to switch
intelligently to standby and disconnect from
Bluetooth when not in use, and to wake up when
worn, so there is generally no need to switch them
off. Should you want to switch off however, slide the
power button and hold it for a second or two. The
indicator will ash red to conrm switch off.
The headphones will provide an audio cue as they
switch on and off.
Note: PX headphones left switched on
but inactive for more than two minutes will
automatically switch to standby mode to save
battery power.
Note: The sensitivity of the ear-piece proximity
sensors that control switch on and standby can
be adjusted within the headphone app.
Diagram 3
Identifying left and right
Diagram 4
Adjusting the ear-piece
Diagram 5
Switching on
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins PX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins PX in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info