706401
10
Zoom out
Zoom in
Previous page
1/193
Next page
10
ENGLISH
Trigger 2
Enables any two PV1D presets to be selected in turn
by a 12V control signal on the Trigger 2 input. Selecting
In engages this control feature and selecting Out
disengages it. Out should be selected if your PV1D is
integrated within an RS232 home automation system.
The default is Out.
Pressing the button while In is highlighted sets
Trigger 2 as the switching mode and allows the user
to select which Presets correspond to 12V and 0V at
the Trigger 2 input. If In is the selected mode, Preset
switching via the front panel buttons in normal mode is
then disabled.
The default presets are Preset 1 for 0V and Preset 2
for 12V.
Audio
The Audio option in the setup home page provides
access to all the PV1D audio setup parameters.
Select Audio to move on to the next setup stage.
About
Displays the PV1D model number and internal software
(rmware) version.
When the PV1D enters setup mode it will display the
setup Home Menu illustrated above left.
The ve menu items provide the following functions:
Display
By default, the display is set to dim and the navigation
buttons fade completely after 30 seconds of button
inactivity to reduce visual distraction in normal
operation. Alternatively, the display may be set to go
off altogether. As soon as any button area is pressed,
the display and buttons become fully bright and always
remain bright when in setup mode.
On/Off
In this context, Off refers to the Standby condition.
To fully disconnect the PV1D from mains
power, it is necessary to switch off the
power outlet socket or withdraw the
power plug.
Select RS-232 if an RS-232-based home automation
system is to be used to switch between on and off, or
if you wish to disable the Auto function.
If Auto is selected, the PV1D will switch on
automatically when an input audio signal is detected
and off following a specied time after the input signal
stops.
The automatic switch-off delay time can be set in the
subsequent menu by pressing the button when
Auto is highlighted. Accessing the delay time will also
select Auto as the switching method.
If Trigger 1 is selected, 12V at the Trigger 1 input will
switch the PV1D on and 0V will switch it off.
The default on/off method is Auto and the default turn-
off time is 30 minutes.
To proceed with PV1D setup, ensure
that the On/Off parameter is initially
set to RS-232. Reset it if required
when all other parameters have
been congured.
Note:ThelogoOn/StandbybuttononthePV1Dmay
alwaysbeusedtoswitchbetweenOnandStandby,
regardlessofthesettingoftheOn/Offparameteron
thescreen.
Display
Dim
Off
About
Model PV1D
Software 1.0.0
Audio
Inputs
Speaker List
Presets
Trigger 2
Out
In
Trigger On (12V)
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Trigger Off (0V)
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Auto Off Delay
30 min
60 min
90 min
120 min
180 min
Trigger
Off Preset 1
On Preset 2
On/Off
RS-232
Auto 30 min
Trigger 1
Setup
Display Dim
On/Off Auto
Trigger 2
Audio
About
5.2 Initial Setup
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins PV1D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins PV1D in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 46,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info