755351

Bowers Wilkins Pi5 Manual

5
Zoom out
Zoom in
Previous page
1/55
Next page
5
ENGLISH
6. Bluetooth Connectivity
6.1 Pairing
Your PI5 earphones are designed to stream music
wirelessly from Bluetooth audio devices, such as
smartphones, tablets, or computers. To do so, the
earphones and device must rst be paired.
When you receive your PI5 earphones they will be
ready to pair to any Bluetooth audio device.
6.1.1 iOS System / Android System without
Google FastPair.
1. Download the Bowers & Wilkins
Headphone App.
2. Open the case lid, the case indicator will
ash blue.
3. Go to the Bluetooth pairing menu of your
device and select the “Bowers & Wilkins PI5”
from the device list.
4. The case indicator will change to solid blue to
indicate pairing is successful.
5. Open the Bowers & Wilkins app and add the
headphones.
Note: Your earphones will automatically exit
Bluetooth pairing mode if no device is paired
within 5 minutes. If pairing fails, the indicator will
rapid ash blue, please try pairing again.
To pair to a subsequent device. See Diagram4:
1. Open the case lid with the earbuds placed
inside the case.
2. Press and hold the button inside the case for
between 1 and 5 seconds, the case indicator
will ash blue.
3. Go to the Bluetooth pairing menu of your new
device and select the “Bowers & Wilkins PI5”
from the device list.
4. The case indicator will change to solid blue to
indicate pairing is successful.
PI5 can remember up to 4 paired Bluetooth Devices.
Repeat the above steps to pair more devices.
Note: Your earbuds will automatically exit
Bluetooth pairing mode if no device is paired
within 5 minutes. If pairing fails, the indicator will
rapid ash blue, please try pairing again.
6.1.2 Google FastPair (For Android System
integrated with GFP Feature)
To add your headphones:
1. Place the case no further than 10cm (4inches)
away from Android device (BT enabled) and
open the PI5 case lid.
2. A GFP (Google FastPair) notication window
will pop up showing “Bowers & Wilkins PI5
detected” and request to start the pairing
process.
3. Press “Notication” button on the window to
enable the pairing, successful connection will
be shown in GFP window.
4. Once paired:
o GFP window will direct you to the Google
Play store to download and Install the
Bowers & Wilkins App.
o L/R Earbud and case Battery Level can be
seen on the GFP window
6.2 Disconnect from a Device
You can quickly disconnect PI5 from a device by
putting the earbuds back to the case. Alternatively,
you can manage connection in further detail using
the Bowers & Wilkins Headphones app under
Connections.
6.3 App features
The Bowers & Wilkins Headphones app provides
extended setup and adjustments to features such
as Adaptive Noise Cancellation, Ambient Pass-
Through, and Wear Sensors. The app also provides
further customisations such as voice prompt, level
of ambient pass-through, connection management,
and headphone software updates. The app is
available as a free download on iOS and Android
devices.
To add your headphones:
1. From your mobile device, download and install
the Bowers & Wilkins Headphones app.
2. Launch the app, then read and follow the
instructions pertaining app notication and
permissions.
3. After reaching the main screen, simply tap +
and following the in-app instructions.
6.4 Headphone Software Update
Bowers & Wilkins will occasionally make available
software updates that rene and optimise the
performance of your headphones or add new
features.
The Bowers & Wilkins Headphones app will notify
you when a software update is available, tap on the
notication and follow the in-app instructions.
Diagram 4
Bluetooth pairing - subsequent device
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins Pi5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins Pi5 in the language / languages: English, German, French, Italian, Portuguese as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info