Manual Bowers Wilkins Panorama (page 12 of 157) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

562447

Zoom out

Zoom in

1/157

mode, surround mode selected, stereo mode selected

and wide stereo mode selected.

3.3 Switching On and Using Panorama

Ensure that the DVD player is connected to Panorama

Input 1, switched on and correctly set up with a disc

playing. In its default setup Panorama will switch on

automatically when an input signal is present on Input

1. It will also automatically select Input 1 together with a

default group of setup parameters that have been

specifically chosen to provide good initial performance

in a typical domestic environment. If a signal is present

on Input 1 Panorama will immediately reproduce it.

Note: If no sound is reproduced either the input cable is

plugged-in to the wrong input socket or there is no

output signal from the DVD. Select Input 2 using the

remote handset to check the former. To check the latter,

disconnect the input cable from Panorama and examine

its end. A faint red light shining from the end of an

optical cable confirms that a signal is present.

Once reproducing audio satisfactorily, use the Panorama

handset or front panel controls to raise or lower the

volume, select inputs or select audio decode modes. The

following paragraph describes audio decode modes.

3.4 Audio Decode Modes

Audio from DVD, videotape and, on occasions,

broadcast sources can be encoded with a variety of

surround sound formats. Panorama is capable of

decoding Dolby Digital, DTS, Dolby PLII surround sound

formats as well as providing conventional and “wide’

stereo reproduction. Not all decode modes however

can be used with each Panorama input or with each

programme material format. Figure 11 illustrates the

decode modes available with each programme material

format and Panorama input.

Panorama will detect Dolby Digital and DTS encoded

programme material and automatically select the

appropriate decode mode. With other programme

material, digital or analogue, the most likely appropriate

decode modes are highlighted in the table. The

Panorama display will show SURR when surround

modes are engaged, STEREO when conventional stereo

is engaged and WIDE when wide stereo is engaged.

digital or analogue material is reproduced, voice mode

implements a custom B&W designed filter algorithm.

The Panorama control panel, illustrated in Figure 10,

incorporates a display, a standby/input button, a

decode mode button and volume adjustment buttons.

The display illustrates the currently selected Panorama

input until a function button is pressed. It will then

display the selected function for a short time. The

display also incorporates six indicators which illuminate

to indicate the currently selected programme decode

Setup Mode. See the Panorama Setup

sections for more information.

mode Selects Panorama home theatre programme

decode modes.

– Lowers Panorama volume.

Selects Panorama inputs.

Note: When reproducing Dolby Digital encoded

material, voice mode implements the compression and

filter algorithm inherent in the encoding. When other

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins Panorama in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bowers Wilkins Panorama Manual

Product: