706256
3
Zoom out
Zoom in
Previous page
1/76
Next page
3
ENGLISH
1. Formation Flex Carton Contents
Formation Flex
Mains power cable set appropriate for your territory
Document pack
2. Installing Your Formation Flex
Formation Flex can be used in a range of situations
— as a single mono speaker, as a compact stereo
pair, or as rear surround speakers in a 5.1 home
theatre setup.
When used as a stereo pair, your Formation Flex
should be at least 1m (3ft) apart and a similar
distance from the listening area. If the speakers
are positioned too close together, the stereo
reproduction may lack scale; if they are too far
apart, the stereo focus may be weak. There is no
need to angle your Formation Flex inwards towards
the listening area however doing so may tighten
the stereo focus. Diagram 1 illustrates basic
speaker positioning.
When used as rear speakers in a 5.1 home theatre
conguration, your Formation Flex should be placed
as close to 120 degrees from the front centre
speaker as possible, as shown in Diagram 2.
Your Formation Flex requires a mains power supply
to operate so must be located within reach of a
mains socket. If your Formation Flex is to use a
wired connection to your home network it will need
to be located within reach of an appropriate network
(Ethernet) cable.
If you decide to place your Formation Flex on a
shelf, ensure that the shelf is easily able to support
the weight.
Like the vast majority of speakers, your Formation
Flex radiates sound energy not only forward but
also to the side and rear. Consequently, if your
Formation Flex is positioned close to room
boundaries, or particularly in a corner, bass may
become over emphasised. If you nd that bass
from your Formation Flex is too prominent, moving
it to an alternative position may be benecial,
however you can also adjust the bass level via
the Bowers & Wilkins Home app Settings menu.
Diagram 1
Stereo positioning
Diagram 2
Home theatre positioning
120º
1 metre
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins Formation Flex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins Formation Flex in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info