Manual Bowers Wilkins DB4S (page 7 of 103) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

706265

Zoom out

Zoom in

1/103

ENGLISH

5. Subwoofers In Use

Once your subwoofer has been set up it is ready

for use. In normal daily use little adjustment should

be necessary, however you may wish to adjust the

subwoofer volume level, use an alternative input EQ,

or select the other input.

• To adjust subwoofer volume use the level control

on the app home page.

• To select an alternative Input EQ select from the

input set up page.

• To select the alternative input select the

alternative tab on the input set up page.

To switch your subwoofer to standby mode press

the standby button. The button indicator will

illuminate red.

Please remember that your DB Series subwoofer is

capable of volume levels that have the potential to

cause nuisance. If in any doubt, reduce the volume.

Note: If a DB subwoofer is overloaded its

standby indicator will ash red.

The performance of your subwoofer may change

subtly during the initial listening period. If it has

been stored in a cold environment, the damping

compounds and suspension materials of the drive

units will take some time to recover their correct

mechanical properties. The drive unit suspension

will also loosen up during the rst hours of use. The

time taken for the speaker to achieve its intended

performance will vary depending on previous storage

conditions and how it is used. As a guide, allow up

to a week for the temperature effects to stabilise and

15 hours of average use for the mechanical parts to

attain their intended design characteristics.

6. Default Reset

To return your subwoofer to its default settings,

press standby button three times in quick

succession. When the default reset is complete the

subwoofer will switch off. Press the standby button

or launch the app to switch on.

Note: It will be necessary following a default reset

operation to instruct previously connected mobile

devices to "forget" and re-connect to your DB

Series subwoofer.

7. Cleaning

Wipe surfaces with a clean lint-free cloth. If you

wish to use a cleaning agent, apply it onto the

cleaning cloth, not directly onto the subwoofer.

Test a small area rst, as some cleaning products

may damage some of the surfaces. Avoid products

that are abrasive, or contain acid, alkali or anti-

bacterial agents.

8. Support

Should you require further help or advice for DB

Series subwoofers please visit the support site here.

Home page

Input set up page

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins DB4S in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bowers Wilkins DB4S Manual

Product: