Manual Bowers Wilkins 684 S2 (page 8 of 59) (English, German, Dutch, French, Italian, Spanish)

582003

Zoom out

Zoom in

1/59

ENGLISH

Before ne tuning, make sure that all the connections in the

installation are correct and secure.

Moving the speakers further from the walls will generally

reduce the volume of bass. Space behind the speakers will

also help to create an aural impression of depth. Conversely,

moving the speakers closer to the walls will increase the

volume of bass. If you want to reduce the volume of bass

without moving the speakers further from the wall, t the

foam plugs or, for less severe bass reduction, the foam rings

in the port tubes (above).

If the bass seems uneven with frequency this will most

probably be due to resonance modes in the listening room.

Even small changes in the position of the speakers or the

listening position can have a profound effect on how these

resonances affect the sound. Try moving the listening position

or locating the speakers along a different wall. The presence

and position of large pieces of furniture can also inuence

resonance modes.

If the central image lacks focus, try moving the speakers

closer together or angling them inward so that they point at a

location just in front of the listening position.

If the sound is too bright, increasing the amount of soft

furnishing in the room (heavier curtains for example) may help

balance the sound. Conversely, reducing the amount of soft

furnishing may help brighten a dull sound.

Ensure that the speaker stands rmly on the oor. Use carpet

piercing spikes if appropriate and adjust them to take up any

unevenness.

4. Fine Tuning

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins 684 S2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bowers Wilkins 684 S2 Manual

Product: