Manual Bowers Wilkins 683 S2 (page 7 of 59) (English, German, Dutch, French, Italian, Spanish)

582004

Zoom out

Zoom in

1/59

ENGLISH

Ensure that the positive terminals on the speaker (marked

+ and coloured red) are connected to the positive output

terminal on the amplier and the negative terminals on the

speaker (marked – and coloured black) are connected to the

negative output terminal on the amplier. Incorrect connection

can result in poor imaging and loss of bass.

Ask your dealer for advice when selecting speaker cable.

Keep its total impedance below the maximum recommended

in the speaker specication and use a low inductance cable

to avoid attenuation of high frequencies.

All connections should be made with the audio equipment

switched off.

There are 2 linked pairs of terminals on the back of the

speaker. For conventional connection (above left), the

terminal links should remain in place (as delivered) and

just one pair of terminals connected to the amplier. For

bi-wire connection (above right), the terminal links should

be removed and each pair of terminals connected to the

amplier independently. Bi-wiring can improve the resolution

of low-level detail.

3. Connections

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins 683 S2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bowers Wilkins 683 S2 Manual

Product: