Manual Bowers Wilkins 607 (page 8 of 90) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

706269

Zoom out

Zoom in

1/90

ENGLISH

Before ne tuning, make sure that all the connections in the

installation are correct and secure.

Moving the speakers further from the walls will generally reduce

the volume of bass. Space behind the speakers will also help

to create an aural impression of depth. Conversely, moving the

speakers closer to the walls will increase the volume of bass.

If you want to reduce the volume of bass without moving the

speakers further from the wall, t the foam plugs or, for less

severe bass reduction, the foam rings in the port tubes (above).

If the bass seems uneven with frequency this will most probably

be a consequence of the acoustic properties of your listening

room. Even small changes in the position of the speakers

or listening position can have a signicant effect on sonic

performance, especially at low frequencies. Try moving your

listening position or locating your speakers along a different wall

if possible.

If no alternatives exist, you can adjust your loudspeakers’

low-frequency performance using the supplied foam bungs.

The bungs are a two-piece part, allowing for a degree of

ne-tuning using either the outer, larger-diameter piece

in isolation or the two parts together. Using solely the outer,

larger-diameter foam bung will deliver less bass attenuation

than the complete bung assembly.

If using oor stands to support the speakers, ensure that they

rest rmly on the oor. Use carpet piercing spikes if appropriate

and adjust them to take up any unevenness. If you are using

our STAV24S2 stands, we recommend mass-loading them to

deliver the best combination of stability and performance. We

recommend lling each stand to its maximum available volume

using an appropriate material such as kiln-dried sand.

4. Fine Tuning

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins 607 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bowers Wilkins 607 Manual

Product: