773496

Bourgini 30.2000 Manual

9
Zoom out
Zoom in
Previous page
1/24
Next page
9
• Make sure your hands are dry before you touch
the appliance.
• Unplug the appliance before assembling
or disassembling it and before cleaning or
servicing the unit.
• Engine driven appliances: beware of sharp
and/or moving parts. Always keep your hands
away from the moving parts when using,
cleaning or servicing the appliance.
• Heating devices: wait until the appliance has
cooled down before you touch the housing and
parts of the unit.
Be extra careful during cleaning and servicing.
APPLICATION
This manual provides information on two beautifully
shaped electric hotplate models: the Classic Cooking
Plate Single and the Classic Cooking Plate Duo. The
1500 Watt Classic Cooking Plate Single has one
hotplate with a 19 cm diameter. The Classic Cooking
Plate Duo has two hotplates: one 1500 Watt hotplate
with a 19 cm diameter and one 1000 Watt hotplate
with a 16 cm diameter. Each hotplate has its own
thermostat.
DESCRIPTION
Both models consist of the following components:
1. Hotplate (19 cm diameter)
2. Hotplate (16 cm diameter, only for
Classic Cooking Plate Duo)
3. Cord and plug
4. Handles (both left and right)
5. Thermostat
6. Indicator light for heating element on/off
7. Housing
FIRST USE
• Remove all packaging materials and stickers
from the appliance.
• Place the appliance on a stable and level
surface at work height, near an earthed
socket. Clear an area of 5 cm minimum
around the appliance. Do not position it right
below kitchen cabinets.
The bottom of the appliance will warm up slightly
as well. Use a heat-resistant (non-combustible) mat
if you have doubts about the heat-resistance of the
underlying surface.
• Make sure that the thermostat is set to ‘Min’
and that the hotplate is free of any objects
(this applies to the Classic Cooking Plate Duo
and the following steps apply to both models).
• Insert the plug in the wall socket.
• Turn the thermostat clockwise to the ‘Max’
position. The indicator light of the hotplate will
light up. As soon as the hotplate has reached
the right temperature, the indicator light will
alternate on and off.
• Allow the hotplate to thoroughly warm up for
10 minutes.
It is normal for some unusual-smelling smoke to be
generated the first time the appliance is used. This
is normal and will pass. Make sure there is enough
ventilation.
• Turn the thermostat anticlockwise to the ‘Min’
position. The indicator light of the hotplate
should no longer light up.
• Allow the hotplate to cool and remove the plug
from the socket. You can now use the
appliance (see “Use”).
USE
• Place the pan on the hotplate.
• Always use pans suitable for cooking on
electric hotplates and with a level base to
ensure good contact.
• The pan’s diameter should be equal or slightly
bigger than that of the hotplate.
• Make sure that the pan is in the centre of the
hotplate and that the handle(s) of the pan are
in a convenient and safe position.
• Insert the plug in the wall socket.
• Turn the hotplate’s thermostat clockwise to
the desired position. The indicator light of the
hotplate will turn on and off once the hotplate
has reached the set temperature. Then the
indicator light will alternately switch on and off.
By turning the adjustment knob from its minimum
to its maximum setting, it is possible to set the
temperature from keep warm and defrost, to simmer
and bring to a boil, frying and grilling, and finally
rapid boil.
• When you’re done, turn the thermostat
anticlockwise to the ‘Min’ position.
• Remove the plug from the socket. After
switching off, the hotplate will remain hot for
a while. Make sure that you don’t burn
yourself. You can use this heat to keep the pan
warm for a while.
• Leave the appliance to cool. This should take
about an hour.
• Clean the appliance (see “Cleaning and
Maintenance and“).
EN
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bourgini 30.2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bourgini 30.2000 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info