Manual Bourgini 22.5079 (page 8 of 20) (English, German, Dutch, French, Spanish)

773428

Zoom out

Zoom in

1/20

• Make sure your hands are dry before you touch

the appliance.

• Unplug the appliance before assembling

or disassembling it and before cleaning or

servicing the unit.

• Engine driven appliances: beware of sharp

and/or moving parts. Always keep your hands

away from the moving parts when using,

cleaning or servicing the appliance.

• Heating devices: wait until the appliance has

cooled down before you touch the housing and

parts of the unit.

Be extra careful during cleaning and servicing.

INTRODUCTION

This stylish mixer is suitable for all mixing and

blending in the kitchen. With a max 1250 watts

of power and 6 speed settings, this appliance can

handle anything. There are 3 “beaters” included for

all processes. This includes dough, cake batter, egg

whites, cream, sundaes, pizza dough, biscuit dough,

etc. The rubber feet stop the mixer moving while in

use.

IMPORTANT: SAFETY SWITCHES

This mixer has 2 safety switches:

1. Thermal protection for the motor.

This prevents overheating. If the mixer is used too

intensively the motor will switch itself off. Let the

mixer cool down for at least 10 minutes. Note: if

this does happen, unplug the power cord for a few

minutes so that the safety switch can reset itself,

and turn the speed control to 0. If you do not remove

the plug from the socket and set the switch to 0, the

motor will not switch back on. This prevents the

motor from unexpectedly starting up as soon as it

has cooled down.

2. Safety switch for the mixer head.

The motor cannot start while the mixer head

is raised. If you open the mixer head while the

appliance is running, the safety switch will

immediately turn the motor off. Afterwards, you can

switch it back on by ﬁrst closing the mixer head and

then turning the speed control back to 0. You can

then carry on mixing by selecting a speed.

Furthermore, the motor will not turn on when you

insert the plug into the socket while the speed

control is already set to speeds 1-6. This stops the

motor from unexpectedly running, and thereby

prevents ingredients from spurting out.

OPERATION AND CONTROLS

(see ﬁgure, p.2)

The mixer includes the following parts:

1. Drive shaft for attaching the beaters

2. Lock button for lifting the mixer head

3. Speed control

The speed switch is also the on/off button:

Position 0 = off

Position 1 to 6 = on

4. Splash guard

5. Stainless steel mixing bowl

6. Dough hook (“beater”)

7. Mixing hook (“beater”)

8. Whisk (“beater”)

9. Mixer head

USE

• Clean the appliance and its parts (see

‘Maintenance and Cleaning’).

• Place the mixer on a solid surface.

• Open the mixer head diagonally upwards by

turning the lock button (2).

• Place the bowl on the base by positioning

the lugs at the bottom of the bowl next to

the arrow on the base, and then turn the

bowl clockwise.

• Attach the desired “beater” to the drive

shaft by holding the slots on the beater shaft

against those on the drive shaft, pressing

the beater against the spring, and turning

it anti-clockwise until it is ﬁrmly locked in

position.

• Put the ingredients into the bowl. Add the

ingredients into the bowl. Not more than 700

grams of dry food + 500 grams of water

together.

• In the case of heavy dough, ﬁll the bowl to a

maximum of 1/3.

• Turn the lock button and lift the mixer head.

Make sure that the mixer head clicks ﬁrmly

into place!

• Begin mixing at low speed to avoid splashing,

and increase the speed slowly as required.

• After mixing, reset the speed control to 0.

• Turn the lock button and lift the mixer head.

• Remove any large lumps of ingredients from

the beater using a spatula or blunt knife

• Press the beater and turn it clockwise until

it releases.

• Turn the bowl to the right until it can be

removed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bourgini 22.5079 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bourgini 22.5079 Manual

Product: