Manual Boston M series (page 6 of 72) (English, German, French, Italian, Swedish, Spanish)

582007

Zoom out

Zoom in

1/72

Front Left and Right Speakers

For optimal results, it is advisable to start with the front left and right speakers positioned 6-12 feet (2-4m) apart from each other,

at least 3 inches (76mm) away from the wall or curtains behind them, and at least 2 feet (0.6m) away from the corners of the room.

Putting the front left and right speakers too close to a wall or corner can produce an unnatural bass reinforcement and side wall

reﬂections that can detract from the speakers balanced, uncolored sound. If your listening position happens to be less than the

distance the speakers are apart, then you may prefer to aim the front of the speakers’ inward toward the primary listening

position (“toe-in”). Experimentation is key to ﬁnding the best front left and right speaker positions. Playing a piece of stereo music

that you are very familiar with and has a large range of frequencies is often the simplest way to ﬁnd the best speaker locations for

your room and listening preferences.

Center Speaker

For optimal results, it is advisable to place the center speaker directly below, behind (perforated screens only) or above the

center of the screen. The BMR driver has extremely wide dispersion characteristics so it is not necessary to “aim” the center

speaker baﬄe towards the listening position. If placed on a shelf or cabinet, position the speaker so the front of it is ﬂush with

the edge of the shelf or cabinet. This will avoid sound reﬂections that detract from the balanced, uncolored sound.

Surround Speakers

For optimal results, it is advisable to position the surround speakers directly to the side of the listening position, above ear

level and at least 2 feet (0.6m) away from the corners of the room. If the speakers are mounted more than 3 inches (76mm)

from the ceiling, it is advisable to position the speaker so the two ports are aimed towards the ceiling. If the speaker is

mounted within 3 inches (76mm) of the ceiling, it is advisable to position the speaker so that the two ports are aimed towards

the ﬂoor.

There are two 4-way hangers built into the back of the MSurround for wall mounting the loudspeaker vertically or horizontally

with the ports pointing in either direction. It is recommended to mount the rubber stand-oﬀs on the back of the side panels

of the MSurround if it is going to be wall mounted. This will minimize the amount of vibration that is transferred directly to

the wall. Consult a person knowledgeable about your wall type to recommend suitable hardware for hanging the speaker.

Usually it is best to leave soundbar oﬀ the wall until connections are made.

Connections

After your speakers are properly placed, you are ready to wire your system.

Loudspeaker Connections

Before you connect the speakers turn oﬀ all the system components. The M Series loudspeakers

feature gold-plated 5-way binding posts. They can accept bare wires, pin lugs, spade lugs, banana

plugs or dual banana plugs.

The illustration shows the bare wire speaker connection method. Remove about ⁄” (10mm) of

the wire insulation. Twist the strands of the wire into a neat bundle. Loosen the top cap by turn-

ing it counter-clockwise until the hole in the center of the terminal post is fully accessible. Insert

the wire through the hole and turn the top cap clockwise by hand to clamp it in place. Do not

use tools to tighten it. Be sure that no strands of wire are able to make contact with the opposite

terminal post. Repeat for the other loudspeaker connections.

If you are using pin lugs, attach them to the wires as speciﬁed by the manufacturer. Loosen the top cap by turning it counter-

clockwise until the hole in the center of the terminal post is fully accessible. Insert the pin lug through the hole and turn the

top cap clockwise by hand to clamp it in place. Do not use tools to tighten it. Repeat for the other loudspeaker connections.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boston M series in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boston M series Manual

Product: