167521
13
Zoom out
Zoom in
Previous page
1/19
Next page
13
Setup Tuning—Full-Range Speakers (cont.)
4) Head Unit
The head unit should have all controls such as bass, treble, balance, and fader set to the flat or centered
position. The volume control should be at the minimum setting. If the head unit has any equalization or bass
management features such as boost, they should be defeated at this time. Turn head unit on and verify that
the GREEN status LED is lit on the amplifier.
6) FRONT and REAR Input Sensitivity Controls
Slowly rotate control clockwise until maximum undistorted playing level is
heard from the speakers. Listen closely for bottoming from the speakers. If
detected, rotate FRONT Input Sensitivity counterclockwise until it is eliminated.
7) FRONT and REAR Crossover Controls
To achieve higher undistorted playing levels from the front speakers, the
FRONT crossover must be engaged. Rotate crossover control fully clockwise.
The highpass crossover point is now set at 350Hz. Rotate FRONT “Q” Control
fully counterclockwise. Move crossover switch to the right (ON) position.
Slowly rotate FRONT input sensitivity control clockwise until maximum undis-
torted playing level is heard from the speakers. Listen closely for bottoming
from the speakers. If detected, rotate FRONT input sensitivity control coun-
terclockwise until it is eliminated. Slowly rotate FRONT highpass crossover
control counterclockwise while listening for bottoming. You are lowering the
crossover point, which means that more bass signal is being sent to the speak-
ers. If bottoming is detected, Rotate FRONT input sensitivity control coun-
terclockwise until it is eliminated and/or rotate the FRONT highpass crossover
control clockwise to raise the crossover point.
5) Volume
With the chosen musical track playing, turn the head unit volume control up until the maximum level of
undistorted signal is heard from the speakers. (For most head units, this will be near the end of the volume
control range.)
WARNING! A distorted signal from the head unit sent to the amplifier can cause loudspeaker failure at high-
er listening levels!
HIGHPASS
OFF
ON
20
350
Hz
200
Downloaded from www.Manualslib.com manuals search engine
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boston Acoustics gt 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boston Acoustics gt 50 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info