721936

Bostitch S2650-2-E Manual

6
Zoom out
Zoom in
Previous page
1/39
Next page
GB
m This tool is intended to be used for fastening wood
to wood in pallet/crate (-1-E / -2-E / -6-E) and construction
applications (-2-E / -6-E). DO NOT USE for fastening harder
materials which could cause buckling of the fasteners and
damage to the tool. If you are unsure of the suitability of
this tool for certain applications, please contact your local
sales oce.
LOADING THE TOOL
m Warning! When loading the tool 1) Never place a
hand or any part of the body in fastener discharge area
of the tool; 2) Never point the tool at self or anyone else;
3) Do not pull the trigger or depress the safety yoke as
accidental actuation may occur, possibly causing injury.
1. Move the pusher to rear until latched. Cover will open.
Pusher front will drop into notch on top of magazine
rail. (Fig 1)
2. Drop staple stick over magzine and slide forward.
Repeat until magazine is loaded, allowing enough space
for pusher to disengage the magazine and the cover to
close (approximately 13mm.) (Fig 2)
3. Pull Pusher back slightly and depress pin detents. Allow
pusher to slide forward over the pin detent. (Fig 3)
Note: Use only fasteners recommended by
Bostitch for use in Bostitch tools which meet
Bostitch specifications.
TRIP OPERATION MODE
THESE TOOLS ARE FITTED WITH 2 DIFFFERENT ACTUATION
MODES DEPENDING ON THE MODEL.
m WARNING! Always disconnect air supply before making
adjustments as accidental actuation may occur, possibly
causing injury.
SEQUENTIAL ACTUATION MODE:
Models: S2638-2-E, S2650-2-E
• These tools are fitted with sequential actuation (see
below). The tools also come supplied with a conversion
kit to convert them to contact actuation. If the kit is
fitted, the model will change from a -2-E to a -1-E.
• The kit includes a new CE label for the tool with the
-1-E code. This label MUST be fitted to the tool if the
conversion kit is installed.
• This conversion kit must only be fitted by authorized
agents of BOSTITCH or by other experts. Once installed,
users must follow the instructions for contact actuation
(see below).
m Warning!
•
IMPORTANT SAFETY INFORMATION ENCLOSED.
•
READ THIS MANUAL BEFORE OPERATING THE TOOL.
•
SAVE FOR FUTURE REFERENCE.
•
FAILURE TO OBSERVE THE FOLLOWING
WARNINGS COULD RESULT IN INJURY.
•
Do not use damaged, frayed or
deteriorated air hoses and fittings.
•
Air powered tools can vibrate in use.
Vibration, repetitive motions or
uncomfortable positions may be harmful
to your hands and arms. Stop using any
machine if discomfort, tingling feeling
or pain occurs. Seek medical advice
before resuming use.
•
Do not carry the tool by the hose.
•
Keep body stance balanced and firm.
Do not overreach when operating this tool.
•
Always turn o the air supply and
disconnect the air supply hose before
installing, removing or adjusting any
accessory on this tool, or before
performing any maintenance on this tool.
•
Use protective equipment such as
glasses, gloves, safety shoes as well
as acoustic protection. Remain vigilant,
use common sense and pay attention
when using the machine.
•
Always wear suitable CE marked
eye protection when operating or
performing maintenance on this tool.
MAX
PSI
•
Operate at no more than the tool’s
maximum pressure stated in column
“I” of the technical data table.
•
Do not over-oil and do not use heavy
grade oil as stalling and low
performance may result.
6
© BOSTITCH 2019
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
compliance for the products.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
rien que les produits soient conformes aux normes CE.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen
nicht die CE-Richtlinien für Produkte.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
produkterne.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
CE-merking for produktet.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch S2650-2-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch S2650-2-E in the language / languages: All languages as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info