721945

Bostitch P110SJ-E Manual

7
Zoom out
Zoom in
Previous page
1/39
Next page
GB
3. Snap magazine spring o magazine block.
4. Lift rear of magazine up and pull magazine back.
5. Remove jammed staple.
6. Slide magazine forward, aligning locating pins with
holes in guide.
7. Push rear of magazine; do so with pin in magazine, block
engages hole in frame.
8. Wedge magazine spring back onto magazine block.
JAW CLOSURE (P88SJ-E, P100SJ-E)
The magazine opening of the jaw plate and the tightness
of the staple clinch depends on the number of washers
added to the jaw piston (Fig 4).
This adjustment should be made only by authorised
agents of Bostitch or by other experts giving due regard
to the safety, operating and maintenance instructions
in this manual and the Safety Operating Instructions
Manual.
TROUBLE SHOOTING (P51-5B-E / P51-10B-E)
Problem: Shuttle punches through board:
Solution: Pressure too high; staple leg too short.
Problem: Staple leg buckles and flattens
against work surface:
Solution: Staple leg too long, shuttle not down against
work due to worn shuttle piston o-ring.
Problem: Driver punches through board:
Solution: Worn driver piston bumper.
Problem: Staple ejects from nose before shuttle
contacts work surface:
Solution: Worn shuttle piston o-ring;
excessive air pressure.
Problem: Staple ejects from rear opening in shuttle
Solution: Worn driver piston o-ring
Problem: Air leaking through exhaust port:
Solution: Worn upper driver piston o-ring; worn upper
shuttle piston o-ring; worn valve stem seat.
Problem: Air leakage through nose piece:
Solution: Worn lower driver piston o-ring;
worn shuttle piston o-ring.
Problem: Staples tumbling in staple channel:
Solution: Feed springs overstressed; feed springs
broken; pusher binding on magazine core;
dirt inside magazine; excessive air pressure.
TROUBLE SHOOTING (P88SJ-E, P100SJ-E)
Problem: Serious air leaking from valve holes:
Solution: Lower O-ring and trigger valve worn out or
not in position. Replace.
O-ring plug of piston rod. Replace.
O-ring valves worn out. Replace.
Plug loose. Tighten.
Problem: Air leaking from hole under cylinder bridge:
Solution: O-ring piston worn out. Replace.
Problem: Does not drive staple but jaw closes:
Solution: Small valve dirty. Lubricate.
Exhaust pinhole plunger or too tight.
Clean pinhole and outer diaphragm.
Rod hole outside of tolerance limits.
Return within tolerance limits (0.75 mm).
Insucient lubrication. Lubricate.
Problem: Air leaking from valve holes:
Solution: O-ring piston valve not completely closed.
Replace inner piston valve O-ring and
lubricate.
Problem: Staples are not completely closed
Solution: Jaw fall block is bent or damaged.
Replace block.
Problem: Jaw does not return:
Solution: Bridge is not squared up. Square up.
Problem: Slow operations:
Solution: Lack of lubrication. Lubricate.
Rod hole outside tolerance levels.
Return within tolerance limits (0.75 mm)
Problem: Staples jam:
Solution: Driver worn out. Replace.
De-jamming block springs slack. Replace.
7
© BOSTITCH 2019
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
compliance for the products.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
rien que les produits soient conformes aux normes CE.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
produkterne.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
CE-merking for produktet.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch P110SJ-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch P110SJ-E in the language / languages: All languages as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info