721870
10
Zoom out
Zoom in
Previous page
1/60
Next page
10
GB
m WARNING! Disconnect tool from air supply before
attempting any parts disassembly and before changing
the work contacting element adjustment.
Step 1. Push in Locking Button
Step 2. Adjust contact arm up to increase depth of
drive or down to decrease it.
Step 3. Release locking button.
DIRECTIONAL EXHAUST DEFLECTOR (FIG 8)
All models EXCEPT N80CB-1ML-E, N8090CB-1ML-E:
Disconnect the air supply. Rotate exhaust deflector to
desired position. Reconnect air supply.
N80CB-1ML-E, N8090CB-1ML-E ONLY: Disconnect the
air supply. Loosen the screw. Adjust to desired exhaust
direction and tighten screw. Reconnect air supply.
UTILITY HOOK (FIG. 9)
N66C-2-E, N66FH-2-E, N75C-2-E, N75CWW-2-M ONLY
These tools may include an additional utility hook
suitable for storage and temporary hanging of the tool.
m WARNING! Never use the utility hook to hang the
tool from the body, clothing or belt.
m WARNING! Never use the utility hook with contact
(black) trigger operated tools.
DRIVER MAINTENANCE INSTRUCTIONS
Worn driver causing poor quality or loss of power
Wear on the driving tip will aect the nail drive, giving
symptoms of bent and incompletely driven nails, and
damaged nail heads
The driver length may be adjusted to allow the driving
tip to be redressed to compensate for wear. Heat and
precise measurement are required. Contact a
qualified service technician for this adjustment.
The length setting for a new driver is shown in the
Technical Data Table, column T. Measurement is from
the top face of the piston.
Note that the measurement U (see Technical Data
Table) from the top of the piston gives the maximum
amount the driver may be adjusted to allow
redressing. Always extend the driver the minimum
amount required to allow redressing to restore the
driving end; several re-dressings will be possible
before this maximum depth is reached.
Note: Driver wear of approximately 3mm can be
tolerated in most applications. However, in dicult
driving applications, driver wear of approximately
1.5 mm. may cause a slight reduction in the apparent
driving power.
© BOSTITCH 2019
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
compliance for the products.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
rien que les produits soient conformes aux normes CE.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
produkterne.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
CE-merking for produktet.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch N401C-1-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch N401C-1-E in the language / languages: All languages as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info