721884
7
Zoom out
Zoom in
Previous page
1/39
Next page
GB
UTILITY HOOK (Fig 3)
These tools include an additional utility hook suitable for
storage and temporary hanging of the tool.
m WARNING! Never use the utility hook to hang the tool
from the body, clothing or belt.
m WARNING! Never use the utility hook with contact
(black) trigger operated tools.
LOADING THE TOOL
1. Open the magazine: Pull pusher back to engage
latch. (Fig 4)
2. Hold nailer down with magazine tilted downwards.
Insert sticks of nails. (Fig 5)
3. Close magazine: Release pusher by first puling back on
the pusher and then pressing the release tab.
Slide pusher against the nails. (Fig 6)
Note: Use only fasteners recommended by
Bostitch for use in Bostitch tools or nails which
meet Bostitch specifications.
REMOVING NAILS (Fig 7)
1. Disconnect the tool from the air supply
2. Pull pusher back until it is securely engaged
3. Slide nails back to opening and push out
CAUTION: The pusher and pusher spring
(constant force spring).
Caution must be used when removing nails, as if pusher is
disengaged from latch it could spring forward potentially
pinching your hand.
Extra caution should be taken when carrying out
maintenance on the magazine area of the tool. The spring is
wrapped around but not attached to a roller. If the spring is
stretched beyond its length, the end will come o the roller
and the spring will roll up with a snap, with a chance of
pinching your hand. Also the edges of the spring are very
thin and could cut your hand. Care must also be taken to
nsure no permanent kinks are put in the springs as this will
reduce the springs force.
GUIDE ROD INSTALLATION AND REMOVAL -
F21PL, F33PT, F33PTSM, N89RH17-2
Step 1 (Fig 8): Locate guide (A); Pull and rotate cover (B).
Step 2 (Fig 9): Locate access windows foe installation
and removal of guide rod (C); Locate guide rod storage
channel (D); Rotate cover open to install or remove guide
rod (E); Install or remove guide rod through rear of
magazine (F).
Step 3 (Fig 10): Install guide rod through (G) for 2.8mm to
3.3mm shank nails. Rotate cover (B) to close; Install guide
rod through (H) for 3.3mm to 4.1mm shank nails. Rotate
cover (B) to close.
DRIVER MAINTENANCE INSTRUCTIONS
Worn driver causing poor quality or loss of power:
Wear on the driving tip will aect the nail drive, giving
symptoms of bent and incompletely driven nails, and
damaged nail heads
The driver length may be adjusted to allow the driving tip
to be redressed to compensate for wear. Heat and
precise measurement are required. Contact a qualified
service technician for this adjustment.
Note: Driver wear of approximately 3mm can be tolerated
in most applications. However, in dicult driving
applications, driver wear of approximately 1.5 mm may
cause a slight reduction in the apparent driving power.
© BOSTITCH 2019
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
compliance for the products.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
rien que les produits soient conformes aux normes CE.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
produkterne.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
CE-merking for produktet.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch F28WW-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch F28WW-E in the language / languages: All languages as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info