721879
43
Zoom out
Zoom in
Previous page
1/192
Next page
GB ©Bostitch. Not to be reproduced without
permission. Unauthorised copies of this document do
not constitute CE compliance for the products.
FR ©BOSTITCH. Reproduction interdite sans permission préalable. Les copies non autorisées de
ce document ne signifient en rien que les produits soient conformes aux normes CE.
DE ©BOSTITCH. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien
dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
NL ©BOSTITCH. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën
van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
DK ©BOSTITCH. ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør
ikke CE overholdelse for produkterne.
FI ©BOSTITCH. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot
eivät muodosta tuotteille CE-yhdenmukaisuutta.
GR ©BOSTITCH. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη
εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
τα προϊόντα.
IT ©BOSTITCH. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
documento non garantiscono la conformità CE per i relativi prodotti.
NO ©BOSTITCH. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette
dokumentet oppfyller ikke kravene for CE-merking for produktet.
PT ©BOSTITCH. Reprodução proibida sem autorização prévia. As cópias não autorizadas deste
documento não estão em conformidade com a CE para os produtos.
ES ©BOSTITCH. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
documento no suponen la conformidad con las normas CE de los productos.
SE ©BOSTITCH. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
documento no suponen la conformidad con las normas CE de los productos.
PL ©BOSTITCH. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie nin
iejszego dokumentu nie stanowią deklaracji zgodności CE
prezentowanych produktów.
CZ ©BOSTITCH. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
prezentowanych produktów.
SK ©BOSTITCH. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
dokumentu
nie v súlade s CE pre dané výrobky.
HU ©BOSTITCH. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.
41
ENGLISH
Preparing the Tool (Fig. A)
1. Remove the battery pack
12
from the tool and ensure the
tool is lockedoff.
2. Remove all nails from the magazine
7
.
3. Check if the contact trip
3
can movefreely.
4. Reload the nails to themagazine.
5. Insert batterypack.
WARNING: Do not use the tool if the contact trip or nail
pusher cannot movefreely.
NOTICE: NEVER spray or in any
other way apply lubricants or cleaning
solvents inside the tool. This can
seriously affect the life and performance
of thetool.
Running in the tool
Please note that this tool requires a run-in period before it
operates with full power due to parts which need to mesh or
wear in together. It may be that the tool does not drive long
nails flush consistently during this period. After driving between
500 and 1000 nails the tool should have run-in and perform at
fullcapacity.
Actuating the Tool (Fig. A)
The BTCN560 can be operated using one of two modes:
sequential action mode or bump actionmode.
The BTCN565 can be operated using one of two modes:
sequential action mode or RapidCyclemode.
Bump action Mode (BTCN560 ONLY)
The bump action mode is used for rapid nailing on flat,
stationary surfaces and typically most effective for applications
driving shorternails.
1. Using the mode selector switch
9
to select the bump
action mode (
).
2. Release the trigger safety lock-off
2
.
a. To drive a single nail, operate the tool as described for
sequential action:
b. Push the contact trip
3
against the worksurface.
c. Pull the trigger switch
1
to actuate the tool. Each trigger
pull with the contact trip pushed against the work
surface will drive onenail.
3. To drive several nails, depress and hold the trigger switch
1
,
and then push the contact trip
3
repeatedly against the
worksurface.
WARNING: Do not keep the trigger depressed when the
tool is not in use. Keep the trigger safety lock-off
2
in the
locked position to prevent accidental actuation when the
tool is not inuse.
4. When changing between sequential and bump modes,
it may be necessary to adjust the driving depth. Refer to
Adjusting the Driving Depth forinstructions.
Sequential action mode
The sequential action mode is used for intermittent nailing
when very careful and accurate placement is desired. It
also offers the maximum delivery of power for driving the
longestnails.
1. Using the mode selector switch
9
, select the sequential
action mode (
).
2. Release the trigger safety lock-off
2
.
3. Push the contact trip
3
against the worksurface.
4. Pull the trigger switch
1
to actuate thetool.
5. Release the trigger and raise the nailer from the
worksurface.
6. Repeat steps 3–5 to actuate the nextnail.
RapidCycle
Mode (BTCN565)
The RapidCycle
mode is ideal for when the user fires many nails
in a sequence and needs to move more rapidly. The tool still
operates in a full sequential mode, but the motor readies itself
for the next nail immediately after firing to minimise time spent
waiting for the motor to get up tospeed.
1. Use the mode selector switch
9
to select the RapidCycle
mode (
).
2. Release the trigger safety lock-off
2
.
3. To drive a single nail, operate the tool as described in the
sequential action:
- Push the contact trip
3
against the workpiece.
- Pull the trigger switch
1
to actuate the tool. (You will
hear the motor spin up after the nail has beendriven).
4. To drive several nails simply repeat the directions in point
3. above. If you do not fire a nail within 2 seconds of the
previous then the motor will coast down torest.
Using the Trigger Lock-off (Fig. C)
Each Bostitch nailer is equipped with a trigger lock-off
2
which
when pushed to the right as shown in FigureC, prevents the
tool from firing a nail by locking the trigger and bypassing
power to themotor.
When the trigger lock-off is pressed to the left, the tool will be
fully operational. The trigger lock-off should always be locked
off whenever any adjustments are made or when tool is not in
immediateuse.
Non-mar Tip (Fig. A)
When using this tool on materials that you do not want to mark,
such as wood cladding, use the plastic non-mar tip
13
over the
contact trip
3
.
LED Indicator (Fig. A)
Your nailer is equipped with two LED indicator lights
5
located
on the back of the tool just below the back cap. Also refer to to
the Troubleshooting Guide for furtherinstruction.
LOW BATTERY
Replace battery with a
chargedpack.
HOT PACK
Let the battery cool or replace it with
a coolpack.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch BTCN565 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch BTCN565 in the language / languages: All languages as an attachment in your email.

The manual is 13,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info