Manual Bostitch BF33 (page 9 of 300) (All languages)

721876

Zoom out

Zoom in

1/300

Safety Instructions for Cordless

Nailers

• Always assume that the tool contains

fasteners. Careless handling of the nailer can

result in unexpected ﬁring of fasteners and

personal injury.

• Do not point the tool towards yourself or

anyone nearby. Unexpected triggering will

discharge the fastener causing an injury.

• Do not actuate the tool unless the tool is

placed ﬁrmly against the workpiece. If the

tool is not in contact with the workpiece, the

fastener may be deﬂected away from your

target.

• Disconnect the tool from the power source

when the fastener jams in the tool. While

removing a jammed fastener, the nailer may

be accidentally activated if it is plugged in.

• Do not use this nailer for fastening

electrical cables. It is not designed for

electric cable installation and may damage the

insulation of electric cables thereby causing

electric shock or ﬁre hazards.

• Always wear safety glasses.

• Always wear ear protection.

• Only use fasteners of the type specified in the

manual.

• Do not use any stands for mounting the tool

to a support.

• Do not disassemble or block any parts of the

fastener driving tool such as the contact trip.

• Prior to each operation check that the safety

and triggering mechanism is functioning

properly and that all nuts and bolts are tight.

• Do not use the BF33

– when changing from one driving location to

another involving the use of scaffoldings,

stairs, ladders or ladder-like constructions,

e.g., roof laths, etc.;

– when closing boxes or crates;

– when fitting transportation safety systems,

e.g., on vehicles, wagons, etc.

For exemptions check your local national

workplace regulations.

• Always check local workplace regulations.

• Do not use the tool as a hammer.

• Never actuate the fastener driving tool into

free space.

• In the work area, carry the tool at the

workplace using only one handle, and never

with the trigger actuated.

• Consider the conditions in

the work area. Fasteners can

penetrate thin work pieces or slip

off corners and edges of the work

piece, and thus put people at risk.

• Do not drive fasteners close to the

edge of the workpiece.

• Do not drive fasteners on top of other

fasteners.

Residual Risks

The following risks are inherent to the use of these

machines:

– Injuries caused by improper handling of the

tool.

– Loss of control due to not gripping tool firmly.

– Muscle strain of arms and hands, especially

when working overhead. Always take regular

breaks when working for long periods of time.

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of personal injury due to flying particles.

– Risk of personal injury due to prolonged use.

– Loss of control caused by recoil.

– Risk of injury caused by pinch points, sharp

edges and improper handling of workpiece.

– Risk of injury caused by sharp edges when

changing nails or inserting nail sticks.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Do not apply lubrication to tool.

Suitable nail collation angle.

Length of nails/

Nail thickness.

GB ©Stanley Bostitch. Not to be reproduced without permission. Unauthorised copies of this

document do not constitute CE compliance for the products.

F ©Stanley Bostitch. Reproduction interdite sans permission préalable. Les copies non autorisées

de ce document ne signifient en rien que les produits soient conformes aux normes CE.

D ©Stanley Bostitch. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte

Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.

NL ©Stanley Bostitch. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige

kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.

udgør ikke CE overholdelse for produkterne.

kopiot eivät muodosta tuotteille CE-yhdenmukaisuutta.

εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για

τα προϊόντα.

documento non garantiscono la conformità CE per i relativi prodotti.

dokumentet oppfyller ikke kravene for CE-merking for produktet.

deste documento não estão em conformidade com a CE para os produtos.

documento no suponen la conformidad con las normas CE de los productos.

Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE

prezentowanych produktów.

Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE

prezentowanych produktów.

dokumentu nie sú v súlade s CE pre dané výrobky.

sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch BF33 in the language / languages: All languages as an attachment in your email.

The manual is 4,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bostitch BF33 Manual

Product: